A4WD3 Tracked

Last modified by Eric Nantel on 2023/11/03 07:06

A4WD3-TK-KT.PNG

LSS - Articulated Robotic Arm.jpg

Table of Contents

Description

The Lynxmotion A4WD3 Rugged Rover is a general purpose mobile robotic platform. The frame is intended to be used in three configurations: 4WD; Mecanum & Tracked, and variations of each platform include without electronics (so developers can integrate their own parts); an RC version and microcontroller-based for autonomous or semi-autonomous use.

The machined aluminum frame integrates rotary seals around each motor shaft, and solid rubber cord between the frame and all panel openings, making it dust and water resistant. A large marine inspection hatch on the top panel provides easy access to internal parts as well as being able to quickly swap or recharge batteries. Aside from the internal electronics mounting plate, the platform is symmetric and can be inverted.

The rover includes four powerful 12V DC motors coupled to 51:1 all metal planetary gears. The rear shaft of each motor is equipped with a magnetic encoder which provides 12 pulses per revolution (PPR). These motors provide 4WD and allow the rover to reach a top speed of around 3m/s (120”/s) without payload. 

Front and rear access panels are made of G10 composite and are intended to allow users to machine openings to add their own components, which may include a wired tether for power and control, LED or LCD feedback, a handle, or whatever else their application may need. Included are a pair of transparent polycarbonate panels which allow for an internally mounted camera and/or or LED lights for increased visibility. Additional panels are available separately.

Features

  • 4x planetary geared DC motors (12V) with rear encoders
  • Machined aluminum frame with G10 composite plates
  • Shaft seals & solid rubber cord for water and dust resistance
  • Internal mounting plate for electronics & battery

Specifications

A4WD3 Wheeled

  • Max speed: ~1.8m/s (71in/s)
  • Weight: 6.8kg (15lbs)
  • Rating: Water and dust resistant
  • Chassis: Aluminum frame & G10 (fiberglass) Pannels
  • Tracks: Two-part injection molded sprocket with G10 center and aluminum hubs with Tracks

Motors

  • Output Shaft: D-Shape 8mm
  • Operating Voltage: 12VDC
  • Gears: Metal planetary gear
  • Unload Speed: 170RPM (±10%)
  • Loaded Speed: 145RPM (±10%)
  • Torque: 11.5kg.cm (9.98lb.in)
  • Gear Ratio: 51:1
  • Current: ≤3A

Encoder

  • Operating Voltage: 5V
  • Signal: Square wave AB 90 deg,
  • Pulse: 12 PPR
  • Frequency: 800kHz

Dimensions

  • Length: 422mm / 16.614"
  • Width: 451.5mm / 17.776"
  • Height: 202mm / 7.953"
  • Ground clearance: 63mm / 2.48"

User Guide

A4WD3-TK-KT.PNG

CAD Files

What's Included

All Kits

 Rover RobotsScrews 
 1x A4WD3-KT8x CPS-034x SHS-1964x SHS-1712x SHS-18 
 Frame Only10mm x M3 Setscrew12mm x M1210mm x M310mm x M5 
 

 
 WashersTubing & HubsTrack SystemA4WD3 Parts
 4x LW-014x A4WD3-WH4x A4WD3-WA2x A4WD3-TRK8x A4WD3-SPK4x A4WD3-SPK-C
 M12 Lock Washer8mm to 17mm Hex Hub17mm Wheel AdapterRubber TrackSprocket HalfSprocket Center
 

 Hex Keys    
 1x HEX-1.5mm1x HEX-10mm    
 Hex Key 1.5mmHex Key 10mm    
 

    

Autonomous Kit

 WiringModulesMot. ControllersBatteries
 1x WH-XT60-XT30-012x SC-011x SEA-011x BBU-01Sabertooth1x SL-LP-08
 Power HarnessServo Cable 12"Servo Extension Cable 6"BotBoarduino Microcontroller2x12A4000mAh 3s LiPo Battery
 

 ChargersWiring    
 1x B3AC1x USBC-02    
 LiPo ChargerUSB Mini Cable    
 

    

Radio Controlled Kit

 Wiring Mot. ControllerBatteries
 1x WH-XT60-XT30-01 1x SEA-011x T8S-BTSabertooth1x SL-LP-08
 Power HarnessServo Cable 12"Servo Extension Cable 6"8 CH Remote with PPM Receiver2x12A4000mAh 3s LiPo Battery
 

 Chargers     
 1x B3AC     
 LiPo Charger     
 

     
Tags:
Created by Eric Nantel on 2021/07/28 07:40
Copyright RobotShop 2018