Wiki source code of BotBoarduino Microcontroller

Last modified by Eric Nantel on 2023/03/15 08:02

Hide last authors
Eric Nantel 2.1 1 {{lightbox image="BBU-01.PNG" width="350"/}}
Eric Nantel 1.2 2
Eric Nantel 3.1 3 [[[[image:[email protected]]]>>https://www.robotshop.com/en/lynxmotion-botboarduino-robot-controller.html||rel="noopener noreferrer" target="_blank"]]
Eric Nantel 1.2 4
5 **Table of Contents**
6
7 {{toc/}}
8
9 = Description =
10
Eric Nantel 2.1 11 The Lynxmotion BotBoarduino Shield-Compatible Robot Controller is mix of BotBoard II and Arduino Duemilanove for your Lynxmotion robot creation. It's perfect for controlling your small robotic projects. It has an onboard speaker, three buttons and LED's, a reset button, logic and servo power inputs, an I/O bus with 20 pins and power and ground, and a 5vdc 1.5amp regulator. Up to 15 servos can be plugged in directly.
Eric Nantel 1.2 12
13 = Features =
14
Eric Nantel 2.1 15 * User Interface
16 * Plug and Play
17 * Perfect for controlling your small robotic projects
18 * Up to 15 servos can be plugged in directly
19 * USB type: Mini or Mini B (not included)
Eric Nantel 1.2 20
21 = Specifications =
22
Eric Nantel 2.1 23 * 6 pins can be used for analog in
24 * 6 pins can be used for PWM output
25 * 2 pins are reserved for UART/USB
26 * Pin 13 has an LED connected to it
Eric Nantel 5.1 27
28 = User Guide =
29
30 * [[doc:.botboarduino-manual.WebHome]]
Copyright RobotShop 2018