Wiki source code of SES - Tubing & Hubs
Version 29.1 by Eric Nantel on 2019/02/01 09:39
Hide last authors
 |
24.1 | 1 | |=(% style="width: 125px;" %)((( |
| |
1.4 | 2 | PICTURE |
| |
26.1 | 3 | )))|=(% style="width: 900px;" %)NAME / DESCRIPTION|=(% style="width: 50px; text-align: center;" %)SES V1|=(% style="width: 50px; text-align: center;" %)SES V2|=(% style="text-align: left;" %)Lynxmotion SKU|=(% style="text-align: left;" %)RobotShop SKU|=(% style="width: 75px;" %)CAD |
| |
24.1 | 4 | |{{lightbox image="HUB-08.png"/}}|((( |
| |
1.4 | 5 | **Aluminum Tubing Connector Hub** |
| 6 | |||
| 7 | High quality anodized aluminum hub allows the aluminum tubing sections (AT-01 thru AT-06) to be connected to our servo brackets. | ||
| |
24.1 | 8 | )))|✓|✓|HUB-08|RB-Lyn-111| |
| 9 | |{{lightbox image="HUB-09.png"/}}|((( | ||
| |
1.4 | 10 | **Aluminum Tubing Option Connector Hub** |
| 11 | |||
| 12 | These hubs can be used with the ASB-19 and BBH-01 to make a lightweight but very strong tubing pivot. They will also be used for options not yet released. | ||
| |
24.1 | 13 | )))|✓|✓|HUB-09|RB-Lyn-152| |
| 14 | |{{lightbox image="HUB-22.png"/}}|((( | ||
| |
1.4 | 15 | **Aluminum Clamping Hub for Carbon Fiber Tubing** |
| 16 | |||
| 17 | Anodized aluminum clamping hub allows carbon fiber tubing to be connected to servo brackets. The pattern allows passing LSS cables. | ||
| |
24.1 | 18 | )))|✓|✓|HUB-22| | |
| 19 | |{{lightbox image="CF-TUBE-16x14x50mm.png"/}}|((( | ||
| |
1.4 | 20 | **50mm Carbon Fiber Tubing** |
| 21 | |||
| 22 | This carbon fiber tubes is meant to be used with the aluminum clamping hub. | ||
| |
24.1 | 23 | )))|✓|✓|CF-TUBE-16x14x50mm| | |
| 24 | |{{lightbox image="CF-TUBE-16x14x75mm.png"/}}|((( | ||
| |
1.4 | 25 | **75mm Carbon Fiber Tubing** |
| 26 | |||
| 27 | This carbon fiber tubes is meant to be used with the aluminum clamping hub. | ||
| |
24.1 | 28 | )))|✓|✓|CF-TUBE-16x14x75mm| | |
| 29 | |{{lightbox image="CF-TUBE-16x14x100mm.png"/}}|((( | ||
| |
13.1 | 30 | **100mm Carbon Fiber Tubing** |
| 31 | |||
| 32 | This carbon fiber tubes is meant to be used with the aluminum clamping hub. | ||
| |
24.1 | 33 | )))|✓|✓|CF-TUBE-16x14x100mm| | |
| 34 | |{{lightbox image="Rubber-Cap.png"/}}|((( | ||
| |
5.1 | 35 | **Rubber End Cap** |
| 36 | |||
| 37 | Rubber end cap intended to be used with the carbon fiber tubing. | ||
| |
24.1 | 38 | )))|X|✓| | | |
| |
20.1 | 39 | |((( |
| |
13.1 | 40 | [[image:Lyxnmotion [email protected]]] |
| |
24.1 | 41 | )))|((( |
| |
1.4 | 42 | **Aluminum Servo Horn Tubing Adapter** |
| 43 | |||
| 44 | These hubs allow any of our tubing sections (AT-01 thru AT-06) to be attached directly to a Hitec servos output shaft. There are lots of interesting uses for this unique hub. | ||
| |
24.1 | 45 | )))|✓|✓|HUB-14|RB-Lyn-312| |
| 46 | |{{lightbox image="AT-XX.png"/}}|((( | ||
| |
4.1 | 47 | **Aluminum Tubing** |
| 48 | |||
| 49 | High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08. Designed to work with the servo tubing connector, servo tubing adapter and tubing option connector hub. Variety of different lengths available: | ||
| 50 | |||
| 51 | Lynxmotion SKU: 1.5" (AT-01) / 2.25" (AT-05) / 3.0" (AT-02) / 3.375" (AT-06) / 4.5" (AT-03) / 6.0" (AT-04) / 8.0" (AT-07) / 10.0" (AT-08) / 12.0" (AT-09) | ||
| 52 | |||
| 53 | RobotShop SKU: 1.5" (RB-Lyn-112) / 2.25" (RB-Lyn-116) / 3.0" (RB-Lyn-113) / 3.375" (RB-Lyn-117) / 4.5" (RB-Lyn-114) / 6.0" (RB-Lyn-115) / 8.0" (RB-Lyn-383) / 10.0" (RB-Lyn-384) / 12.0" (RB-Lyn-379) | ||
| |
24.1 | 54 | )))|✓|✓|AT-XX|Notes | |