Wiki source code of SES - Tubing & Hubs
Version 3.1 by Eric Nantel on 2019/01/09 14:47
Hide last authors
 |
2.1 | 1 | |=(% style="width: 125px;" %)((( |
| |
1.4 | 2 | PICTURE |
| 3 | )))|=(% style="width: 2000px;" %)NAME / DESCRIPTION|=SES V1|=SES V2|=LYNXMOTION SKU|=RobotShop SKU|=(% style="width: 120px;" %)CAD's | ||
| |
3.1 | 4 | |(% style="width:120px" %) |(% style="width:1063px" %)((( |
| |
1.4 | 5 | **Aluminum Tubing Connector Hub** |
| 6 | |||
| 7 | High quality anodized aluminum hub allows the aluminum tubing sections (AT-01 thru AT-06) to be connected to our servo brackets. | ||
| 8 | )))|✓|✓|HUB-08|RB-Lyn-111| | ||
| |
3.1 | 9 | |(% style="width:120px" %) |(% style="width:1063px" %)((( |
| |
1.4 | 10 | **Aluminum Tubing Option Connector Hub** |
| 11 | |||
| 12 | These hubs can be used with the ASB-19 and BBH-01 to make a lightweight but very strong tubing pivot. They will also be used for options not yet released. | ||
| 13 | )))|✓|✓|HUB-09|RB-Lyn-152| | ||
| |
3.1 | 14 | |(% style="width:120px" %) |(% style="width:1063px" %)((( |
| |
1.4 | 15 | **Aluminum Clamping Hub for Carbon Fiber Tubing** |
| 16 | |||
| 17 | Anodized aluminum clamping hub allows carbon fiber tubing to be connected to servo brackets. The pattern allows passing LSS cables. | ||
| |
3.1 | 18 | )))|✓|✓|HUB-22| | |
| 19 | |(% style="width:120px" %) |(% style="width:1063px" %)((( | ||
| |
1.4 | 20 | **50mm Carbon Fiber Tubing** |
| 21 | |||
| 22 | This carbon fiber tubes is meant to be used with the aluminum clamping hub. | ||
| |
3.1 | 23 | )))|✓|✓|CF-TUBE-16x14x50mm| | |
| 24 | |(% style="width:120px" %) |(% style="width:1063px" %)((( | ||
| |
1.4 | 25 | **75mm Carbon Fiber Tubing** |
| 26 | |||
| 27 | This carbon fiber tubes is meant to be used with the aluminum clamping hub. | ||
| |
3.1 | 28 | )))|✓|✓|CF-TUBE-16x14x75mm| | |
| |
1.4 | 29 | |(% style="width:120px" %)((( |
| |
3.1 | 30 | |
| |
1.4 | 31 | )))|(% style="width:1063px" %)((( |
| 32 | **Aluminum Servo Horn Tubing Adapter** | ||
| 33 | |||
| 34 | These hubs allow any of our tubing sections (AT-01 thru AT-06) to be attached directly to a Hitec servos output shaft. There are lots of interesting uses for this unique hub. | ||
| 35 | )))|✓|✓|HUB-14|RB-Lyn-312| |