LSS-P - Arduino Custom Firmware
Version 13.1 by Eric Nantel on 2023/10/18 14:35
Disclaimer
Prerequisites
Setup
Pinout
| Hardware | Brand / Model / Datasheet | Pins | Address | Examples | ||
| Light Emitting Diode (LED) | ||||||
| Red | PD12 | |||||
| Green | PD13 | |||||
| Blue | PD10 | |||||
| Inertial Measuring Unit (IMU) | ||||||
| I2C / SDA | PB7 | |||||
| I2C / SCL | PB6 | |||||
| Temperature PCB - ??? | 0x18 | |||||
| I2C / SDA | PB11 | |||||
| I2C / SCL | PB10 | |||||
| EERPROM | 0x50 | |||||
| I2C / SDA | PC9 | |||||
| I2C / SCL | PA8 | |||||
Examples
| Hardware | Example |
| Push Button | |
| EEPROM | |
| IMU | |
| Stepper Driver / Stepper | |