Wiki source code of LSS-PRO CAN Bus
Version 3.1 by Eric Nantel on 2024/11/25 14:12
Hide last authors
 |
2.1 | 1 | |
| 2 | |||
| |
3.1 | 3 | |(% colspan="2" rowspan="1" %)Data format on USB-Serial|(% colspan="3" rowspan="1" %)Data format on CAN-Bus |
| |
2.1 | 4 | |(% style="width:150px" %)Header|(% style="width:300px" %)# or *|(% style="width:150px" %)ID[28-20]|(% style="width:300px" %)Reserved| |
| 5 | | | |ID[19]|Request/Response (0:Request 1:Response)|# = 0, * = 1 | ||
| 6 | | | |ID[18]|Presence of command parameters|Set to 1 if there are parameters such as D commands, set to 0 if there are parameters such as Query commands, etc. | ||
| 7 | | | |ID[17]|Presence of sub-command id|Set to 1 if there is a Modifier command (SD/T), otherwise set to 0. | ||
| 8 | | | |ID[16]|Presence of sub-command parameter|Set to 1 if there is a parameter for the Modifier command, otherwise set to 0. | ||
| 9 | (SD/T requires a parameter, so currently if ID[17] is 1, ID[16] will also be 1.) | ||
| 10 | |ServoID|Servo ID|ID[15-8]|Source ID| | ||
| 11 | | | |ID[7-0]|Destination ID| | ||
| 12 | |Command|Action Command (ex. RESET, D, etc..) | ||
| 13 | Query Command (ex. QID, QD, etc...) | ||
| 14 | Configuration Command (ex. CID, etc...)|DATA0|Command ID|See Command ID List. | ||
| 15 | |Value|Command Value|DATA1|Command parameter0| | ||
| 16 | | | |DATA2|Command parameter1| | ||
| 17 | | | |DATA3|Command parameter2| | ||
| 18 | | | |DATA4|Command parameter3| | ||
| 19 | |Modifier|Modifier Command (ex. SD, T, etc...)|DATA5|Sub-command ID|See Command ID List. | ||
| 20 | |Modifier Value|Modifier Command Value|DATA6|Sub-command parameter0| | ||
| 21 | | | |DATA7|Sub-command parameter1| | ||
| 22 | |||
| 23 |