EH3-R Add-On Decks Assembly Guide

Version 10.1 by Eric Nantel on 2023/01/26 10:31

EH3-R Add-On Decks Assembly Guide.

Updated 05/25/2006.

Safety first! Wear eye protection and never touch a powered robot!

Note: Do not use Loctite or thread locks on the assembly. They are not necessary and may cause damage to the Lexan.

Image of DD 3DOF Leg.

Step 1.
Attach four 1" Hex Standoffs to the smaller panel as shown, using four 4-40 x 3/8" screws.

4 x	4 x

Figure 1.

Step 2.
Attach six 1" Hex Standoffs to the larger panel as shown, using six 4-40 x 3/8" screws.

6 x	6 x

Figure 2.

Step 3.
Connect the panels together as shown, using four 4-40 x 3/8" screws.

4 x

Figure 3.

Step 4.
Drop the servo in from the top and secure in place with four snap rivet fasteners.

4 x

Figure 4.

Step 5.
Use six 4-40 x 3/8" screws to attach the decks to the EH3-R.

6 x

Figure 5.

Tags:

Created by Eric Nantel on 2023/01/26 10:29