Wiki source code of 4 DoF Arm Quickstart
Version 25.1 by Eric Nantel on 2020/10/08 09:55
Hide last authors
 |
25.1 | 1 | The following steps are in logical order and would guide you through the whole assembly process. |
| 2 | |||
| |
13.1 | 3 | **LSS 4 DoF Robotic Arm //__KIT__// steps:** |
| |
3.1 | 4 | |
| |
24.1 | 5 | * [[4 DoF Servo Setup>>doc:.4dof-servo-setup.WebHome]] |
| 6 | * [[4 DoF Base>>doc:.4dof-base.WebHome]] | ||
| 7 | * [[4 DoF Links>>doc:.4dof-links.WebHome]] | ||
| 8 | * [[4 DoF Gripper>>doc:.4dof-gripper.WebHome]] | ||
| 9 | * [[4 DoF Assembly>>doc:.4dof-assembly.WebHome]] | ||
| 10 | * [[4 DoF Electronics>>doc:.4dof-electronics.WebHome]] | ||
| 11 | * [[4 DoF Wiring>>doc:.4dof-wiring.WebHome]] | ||
| 12 | * [[4 DoF Aesthetic>>doc:servo-erector-set-robots-kits.ses-v2-robots.ses-v2-arms.lss-4dof-arm.4dof-arm-quickstart.4dof-aesthetic.WebHome]] | ||
| |
22.1 | 13 | |
| |
13.1 | 14 | **LSS 4 DoF Robotic Arm //__ASSEMBLED__// steps:** |
| |
3.1 | 15 | |
| |
24.1 | 16 | * [[4 DoF Assembled>>doc:.4dof-assembled.WebHome]] |
| 17 | * [[4 DoF Aesthetic>>doc:servo-erector-set-robots-kits.ses-v2-robots.ses-v2-arms.lss-4dof-arm.4dof-arm-quickstart.4dof-aesthetic.WebHome]] | ||
| |
23.1 | 18 | |
| 19 | **LSS 4 DoF Robotic Arm Software:** | ||
| 20 | |||
| |
24.1 | 21 | * [[LSS FlowArm Software>>doc:servo-erector-set-system.ses-software.lss-flowarm.WebHome]] |
 |
9.1 | 22 | |
| |
18.1 | 23 | **LSS 4 DoF Robotic Arm Parts:** |
| 24 | |||
| |
24.1 | 25 | * [[4 DoF Shells (parts)>>doc:servo-erector-set-robots-kits.ses-v2-robots.ses-v2-arms.lss-4dof-arm.4dof-arm-quickstart.4dof-shells.WebHome]] |
| |
18.1 | 26 | |
| |
17.1 | 27 | If you experience any issues or have any questions, do not hesitate to write to us on the forum at the following link and we will be happy to help [[HERE>>https://www.robotshop.com/community/forum/c/lynxmotion/robot-arms]]. |