Wiki source code of 5 DoF Arm - Quickstart
Version 26.1 by Eric Nantel on 2020/10/08 09:55
Hide last authors
 |
26.1 | 1 | The following steps are in logical order and would guide you through the whole assembly process. |
| 2 | |||
| |
25.1 | 3 | **LSS 5 DoF Robotic Arm //__KIT__// steps:** |
| |
3.1 | 4 | |
| |
26.1 | 5 | * [[5 DoF Servo Setup>>doc:.5dof-servo-setup.WebHome||target="_blank"]] |
| 6 | * [[5 DoF Base>>doc:.5dof-base.WebHome||target="_blank"]] | ||
| 7 | * [[5 DoF Links>>doc:.5dof-links.WebHome||target="_blank"]] | ||
| 8 | * [[5 DoF Gripper>>doc:.5dof-gripper.WebHome||target="_blank"]] | ||
| 9 | * [[5 DoF Final>>doc:servo-erector-set-robots-kits.ses-v2-robots.ses-v2-arms.lss-5dof-arm.5dof-arm-quickstart.5dof-final-assembly.WebHome||target="_blank"]] | ||
| 10 | * [[5 DoF Electronics>>doc:.5dof-electronics.WebHome||target="_blank"]] | ||
| 11 | * [[5 DoF Wiring>>doc:.5dof-wiring.WebHome||target="_blank"]] | ||
| |
24.1 | 12 | |
| 13 | If you experience any issues or have any questions, do not hesitate to write to us on the forum at the following link and we will be happy to help [[HERE>>https://www.robotshop.com/community/forum/c/lynxmotion/robot-arms]]. |