LSS - Horns Assembly

Version 54.1 by Eric Nantel on 2019/02/08 09:22

LSS - Horns Assembly
Step 1/2
1x LSS-DH
Driving Horn
1x PHS-16
M3 x 10mm

LSS - Horns Assembly
Step 2/2
1x LSS-IH
LSS Idler Horn
1x LSS-FLG
Idler Flange
1x BB-03
8 x 3mm Bearing
1x PHS-16
M3 x 10mm
Comments:Can be used in any of three idler positions

MODS
1x LSS-IH
LSS Idler Horn
1x LSS-FLG
Idler Flange
1x BB-03
8 x 3mm Bearing
Comments:Idler needs to be sanded (a file works best) to have the bottom of the idler flush with the bearing. This will provide the tolerance needed to have the shoulder sit tightly with no play. The idler shoulder should be flipped to have the flat surface on the idler and the shoulder on the servo.

Created by Eric Nantel on 2019/01/11 13:23
Copyright RobotShop 2018