Wiki source code of SES - Bracket Information
Version 11.1 by Coleman Benson on 2019/02/19 08:38
Hide last authors
 |
10.1 | 1 | Brackets form the structure of all servo erector set projects. Certain brackets are intended to connect to servos, others connect between brackets and more. The SES mounting pattern (v1, v2, v2b) is used throughout the system and is intended to allow for semi-universal mounting. |
| 2 | |||
| |
11.1 | 3 | = SES Pattern = |
| |
10.1 | 4 | |
| 5 | The SES mounting pattern is based on two holes which are used for mounting objects to a Hitec standard servo horn such as the Hitec HS-422. The mounting pattern involves: | ||
| 6 | |||
| |
11.1 | 7 | |(% style="width:350px" %)[[image:SES-V2 - SES Pattern (4).png||width="200"]]|((( |
| 8 | **SES V1 Pattern** | ||
| |
10.1 | 9 | |
| |
11.1 | 10 | * 8mm diameter center hole |
| 11 | * Four equally spaced holes located on a 0.656” diameter circle. Sometimes these four holes are threaded 2-56 (imperial), sometimes they are not | ||
| 12 | * Outer diameter is 1” (2.54cm) | ||
| 13 | ))) | ||
| 14 | |[[image:SES-V2 - SES Pattern (8).png||width="200"]]|((( | ||
| 15 | **SES V2 Pattern** | ||
| |
10.1 | 16 | |
| 17 | Newer brackets have four additional holes (for a total of eight holes) spaced at 45 degrees to allow for easy mounting. | ||
| 18 | |||
| |
11.1 | 19 | * 8mm diameter center hole |
| 20 | * Eight equally spaced holes located on a 0.656” diameter circle. Holes are threaded 2-56 (imperial). | ||
| 21 | * Outer diameter is 1” (2.54cm) | ||
| 22 | ))) | ||
| 23 | |{Image}|((( | ||
| 24 | **SES V2b Pattern** | ||
| |
10.1 | 25 | |
| 26 | Several of the brackets have an opening which allows the SES V2 cable(s) to pass through. The aluminum clamping hub also has this opening, so when used with carbon fiber tubing, the wires can be passed within the structure. | ||
| 27 | |||
| |
11.1 | 28 | * X-shaped diameter center hole |
| 29 | * Four equally spaced holes located on a 0.656” diameter circle. Holes are not threaded. | ||
| 30 | ))) |