Changes for page SES-V2 Horns

Last modified by Eric Nantel on 2024/07/03 10:04
From version < 3.1 >
edited by Eric Nantel
on 2018/04/30 09:26
To version < 11.1 >
edited by Eric Nantel
on 2018/04/30 09:37
< >
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,34 +1,36 @@
1 1  = Gears =
2 -Edit
2 +
3 3  16T driven + 48T idler = 3:1 ratio
4 4  
5 -LSS Gear - 16T - Gearbox.png
5 +[[image:LSS-Gear-16T-Gearbox.png||width="300"]]
6 6  
7 7  This has the effect of increasing the torque by a factor of 3x while decreasing the maximum speed and overall angle by a factor of 3x. Therefore a full rotation of the output horn will result in a 120 degree travel of the larger 48 tooth gear. For high torque, high axial or radial loads, use the external gear bracket assembly. Center distance when using these two gears is 1.00 inches.
8 8  
9 9  32T driven + 32T ideler = 1:1 ratio
10 10  
11 -LSS Gear - 32T Gearbox - Top.png
11 +[[image:LSS-Gear-32T-Gearbox.png||width="300"]]
12 12  
13 13  This has no effect on gearing, rpm or overall angle. Having both gears on the LSS creates a second driven axis. A 1:1 configuration can be used with the gear bracket where high axial or radial loads exist. Center distance when using these two gears is 1.00 inches.
14 14  
15 15  = External Gear Specs / Drawing =
16 +
16 16  Edit
17 17  {Include image showing what each value represents - use Wikipedia or any other site "Spur gear nomenclature"}
18 18  
19 - 16T Driven 48T Idler 32T Driven 32T Idler
20 - Teeth 16 48 32 32
21 - Pitch 16
22 - Pressure Angle 20 20 20 20
23 - Pitch Diameter 1" 1"
24 - Outer Diameter 1.06" 1.06"
25 - Material Aluminum Aluminum
26 - Spline
20 +(% style="width:600px" %)
21 +| |16T Driving|48T Idler|32T Driving|32T Idler
22 +|Teeth|16|48|32|32
23 +|Pitch|16| | |
24 +|Pressure Angle|20|20|20|20
25 +|Pitch Diameter| | |1"|1"
26 +|Outer Diameter| | |1.06"|1.06"
27 +|Material|Aluminum|Aluminum|Aluminum|Aluminum
28 +|Spline|✓|✗|✓|✗
27 27  
28 28  = Spline =
29 -Edit
30 -LSS Gear - 16T - Splines.png
31 31  
32 +[[image:LSS-Gear-16T-Splines.png||width="300"]]
33 +
32 32  The spline used on the LSS external gears is a 24 tooth version which is compatible with Hitec components.
33 33  
34 34  = Gear Bracket Assembly / Mounting & Parts =
... ... @@ -36,5 +36,7 @@
36 36  Show in images how to assemble the gear bracket with various parts: bearings, shaft, shaft retainer, idler, gear (two options). Include RobotShop Parts #s
37 37  
38 38  = LSS External Gear Mounting Options =
39 -Edit
41 +
40 40  There are various ways to mount the gears to the servo without using the gear bracket. Below are just some examples showing gears mounted with and without the gearbox bracket. Note that the gearbox bracket can be mounted on multiple sides of the servo. The gearbox bracket is used largely for applications with higher forces (axially and radially) and higher torque.
43 +
44 +[[image:LSS-Gear-All-Ratios.png||height="211" width="600"]]
LSS-Gear-16T-Splines.png
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +-1 bytes
Content
LSS-Gear-32T-Gearbox.png
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +-1 bytes
Content
LSS-Gear-All-Ratios.png
Author
... ... @@ -1,0 +1,1 @@
1 +xwiki:XWiki.ENantel
Size
... ... @@ -1,0 +1,1 @@
1 +-1 bytes
Content

Navigation

Copyright RobotShop 2018