SES-P Output Shaft Cover
Version 19.2 by Eric Nantel on 2024/07/09 14:35
Table of Contents
Description
These plastic two part covers are intended to go around the gearbox section of each of the three actuators, and held in place using the Lynxmotion foam wrap. The plastic simply provides lightweight spacing so the diameter of the outside of the foam, when mounted, corresponds to the diameter of each actuator. Holes for mounting screws to connect the two halves are provided, but the foam keeps the halves in place so no screws are provided. When using screws, be sure to find the appropriate size to not strip the plastic parts. If replacement covers are needed, they can be easily 3D printed without support material.
What's Included
| PICTURE | NAME / DESCRIPTION | Qty | Lynxmotion SKU | CAD |
|---|---|---|---|---|
| Lynxmotion SES-PRO Aluminum Clamp for 70mm CF Tubes | 1 | SES-P-A-C-70 |
|
| Steel Socket Head Screw - Black - M3 x 12mm - 2.5mm Hex | 10 | SHS-22 |  |
| Ball-End Hex L-Key 2.5mm | 1 | B-HEX-2.5 | |
