Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -30,13 +30,13 @@
30	30
31	31	Upon connection, the software will read all configuration values and update the values in the "configurations" section. Visit the [[LSS Communication Protocol>>doc:LSS - Overview (DEV).LSS - Communication Protocol.WebHome]] page for more information about commands, actions and configurations.
32	32
33		-Changing the values will not affect the session. Values which have been changed will have a yellow background.
	33	+Changing the values will not affect the session. Values which have been changed will have a yellow background. The values which can be entered are restricted to what the servo can accept; for example, servo IDs must be below 250.
34	34
35		-Pressing the **UPDATE** button will write all values to EEPROM, changing the configurations, and reverting all background colors to white.
	35	+**UPDATE** Pressing this button will write all values to EEPROM, changing the configurations, and reverting all background colors to white.
36	36
37		-The **UNDO ALL** is a shortcut button which reverts all changes made which have not been written to EEPROM.
	37	+**UNDO ALL** is a shortcut button which reverts all changes made which have not been written to EEPROM.
38	38
39		-MODE (**SMART** / **RC POS** / **RC WHL**): This is a shortcut to change the servo's mode (LSS Smart Serial / RC PWM Position / RC PWM Wheel). IMPORTANT NOTE: Should you select either of the two RC modes, the LSS Config software will no longer be able to communicate with the servo. You must use the button menu to return to LSS serial mode (hold the button, release, press twice).
	39	+**SMART** / **RC POS** / **RC WHL**: This is a shortcut to change the servo's mode (LSS Smart Serial / RC PWM Position / RC PWM Wheel). IMPORTANT NOTE: Should you select either of the two RC modes, the LSS Config software will no longer be able to communicate with the servo. You must use the button menu to return to LSS serial mode (hold the button, release, press twice).
40	40
41	41	= Sensor Graph =
42	42