Version 4.1 by Coleman Benson on 2018/06/12 14:26
Show last authors
1 The Multirotor Erector Set (MES) - Reconfigurable Frame is an all-in-one frame designed to allow the user to easily experiment with a variety of different frame designs, without having to invest in a variety of custom frames. The frame is based on the M.E.S. system which uses aluminum clamps, G10 plates and carbon fiber tubing.
2
3 |CAD Image|Title / Description|Assembly Step Links
4 |[[image:NoPreview.png||height="100" width="100"]]|(((
5 **X4 Quadcopter**
6
7 The X4 quadcopter design incorporates folding arms and removable landing gear. There is a motor mounted to each of the four arms. Wiring is internal.
8 )))|
9 |[[image:NoPreview.png||height="100" width="100"]]|(((
10 **X8 Quadcopter**
11
12 The X4 quadcopter design incorporates folding arms and removable landing gear. There is a motor mounted to both the top and the bottom of each of the four arms. Wiring is internal.
13 )))|
14 |[[image:NoPreview.png||height="100" width="100"]]|(((
15 **Hexacopter (H6)**
16
17 The H6 hexacopter design incorporates folding arms and removable landing gear. There is a motor mounted to each of the six arms,. Wiring is internal.
18 )))|
19 |[[image:NoPreview.png||height="100" width="100"]]|(((
20 **Hexacopter (H12)**
21
22 The H12 hexacopter design incorporates folding arms and removable landing gear. There is a motor mounted to both the top and bottom of each of the six arms. Wiring is internal.
23 )))|
24 |[[image:NoPreview.png||height="100" width="100"]]|(((
25 **Y6**
26
27 The Y6 design includes two folding arms, each with a motor, and a rear fixed arm with a motor mounted to the top and bottom of the arm. Wiring is internal.
28 )))|
29 |[[image:NoPreview.png||height="100" width="100"]]|Custom|
30
31
Copyright RobotShop 2018