01 - Arms

Last modified by Eric Nantel on 2021/08/06 12:22

Return

MES - Arms

Arms - MES

Step 1/7

1x MES-F-MP

Motor Plate

2x UAV-Clamp

Tube Clamp

4x SHS-01

4-40 x 1/4"

Comments:This should be done 2 times (one top and one bottom)

Brushless Motor Mounting

Optional

1x BL-MOTOR

Brushless Motor

4x Screws

Motor Screws

Comments:It is suggested that you mount your motors at this step. Screws are normally provided with each motor.

Arms - MES

Step 2/7

2x MES-F-EP

ESC Plate

1x CF-TUBE

300mm Tube

Arms - MES

Step 3/7

1x Step 01

Step 1 Assembly

Arms - MES

Step 4/7

4x SHS-05

4-40 x 1/4"

ESC Mounting & Wiring

Optional

1x - ESC

Standard ESC

2x ZIP-TIE

10cm Zip Tie

Comments:The side / ESC plates are provided in order to mount the ESCs as shown.

Arms - MES

Step 5/7

1x MES-F-WCP

Wire Cover

1x RHG-01

Hole Grommet

4x PHS-02

2-56 x 1/4"

At this stage you completed the "Center Arm" and you can proceed to build the "Corner Arm"

Arms - MES

Step 6/7

4x UAV-Clamp

Tube Clamp

4x SHS-01

4-40 x 1/4"

2x SHS-05

4-40 x 3/4"

Comments:Do not fully tighten the 4-40 x 3/4" screws, this will be done in the next step.

Arms - MES

Step 7/7

2x MES-F-ADJ

Distance Jig

Return

MES - Arms

Tags:

Created by Eric Nantel on 2021/08/06 09:44