Lynxmotion BotBoarduino

Arduino & Shield compatible microcontroller board.

• BotBoarduino

LSS Adapter (Type-C)

• LSS - Adapter Board (Type-C)

LSS Adapter (USB Mini) 

• LSS - Adapter Board (USB Mini)

LSS 2IO Board

• LSS - 2IO Board

LSS 2MC Board

• LSS - 2MC Board (coming soon)

LSS 5VR Board

• LSS - 5VR Board

LSS Power Hub

• LSS - Power Hub

LSS LED Board

High output single white LED

• LSS - LED Board

A4WD3-LED Board

High output single CREE white LED
Array of 8 red LED

• A4WD3-LED Board

Lynxmotion Smart Servo (LSS) - Serial Cables

Lynxmotion SKU: 100mm / 150mm / 200mm 300mm

LSS-C-100-S

LSS-C-150-S

LSS-C-200-S

LSS-C-300-S

RB-Lyn-999

RB-Lyn-997

RB-Lyn-995

RB-Lyn-992

Lynxmotion Smart Servo (LSS) - 300mm RC Cable

This cable allows the LSS servos to be easily connected to a standard 3-pin RC source. The fourth connector (from the servo's Tx pin) is separate. Should additional length be needed, a standard 3-pin servo extension (male to female) cable can be used.

Lynxmotion Smart Servo (LSS) - Serial Y Cables

Lynxmotion SKU: 100mm / 150mm / 200mm / 300mm

LSS-C-100-Y

LSS-C-150-Y

LSS-C-200-Y

LSS-C-300-Y

RB-Lyn-998

RB-Lyn-996

RB-Lyn-994

RB-Lyn-991

Plastic Cable Clip

Clip intended to be mounted to SES V2 brackets to help with wire routing. Magnets are meant to attach external shells.

Extra Long Stacking Headers

These extra long stacking headers are intended to be use with the LSS Adapter and fit through the board. They are used to stack a shield above the LSS adapter and onto a shield compatible microcontroller.

Lynxmotion USB A to Mini B

• Length: 91.44cm / 36"

Lynxmotion USB A to Type C

• Length: 1m / 39.37"

Power Harness XT60 to XT30

• 1x XT60 Male
• 3x XT30 Female
• 3x XT30 Male with 30cm 16AWG cables

12V DC, 6A Wall Adapter

This custom 12V DC, 6A (max continuous) wall adapter includes a high current XT60 connector for use with the LSS Adapter board. Accepts 100 to 240VAC, and the power cord includes an On/Off switch.

12V-XT60

BX-12006000-XT60

11.1V DC, 3500mAh Lithium Ion (Li-Ion) Battery

This 3S (3 cell) Lithium Ion battery is made up of three LG 3500mAh cells in series. The connector is standard XT60 and there is a three cell, four-pin JST balance charger. The batteries are meant to discharge at up to 10A continuous current. NOTE: This battery can only be charged through the JST connector, trying to charge the pack through the XT60 connector might damage the battery pack.

B3AC Lithium Battery Charger

The inexpensive B3AC LiPo battery charger has been tested to work with the 11.1V DC Lithium Ion battery pack. It is compatible with 2S and 3S balance connectors. Only the balance port is connected.