Lynxmotion PRO CAN / Ethernet Cable

Communication cables used in the Lynxmotion PRO system

• Lengths: 50cm, 65cm, 90cm

Lynxmotion PRO Power XT60 Extension Cable

Power cables used in the Lynxmotion PRO system

• Lengths: 50cm, 65cm, 90cm, 2m

M12 to M12 Extension Cable (6')

Data and power cable used for DH Robotics two and three finger grippers

Lynxmotion USB A to Type C

Data and power cable

• Length: 1.5m or more

Lynxmotion Smart Servo (LSS) - Serial Cables

Lynxmotion SKU: 100mm / 150mm / 200mm 300mm

LSS-C-100-S
LSS-C-150-S
LSS-C-200-S
LSS-C-300-S

RB-Lyn-999
RB-Lyn-997
RB-Lyn-995
RB-Lyn-992

Lynxmotion Smart Servo (LSS) - 300mm RC Cable

This cable allows the LSS servos to be easily connected to a standard 3-pin RC source. The fourth connector (from the servo's Tx pin) is separate. Should additional length be needed, a standard 3-pin servo extension (male to female) cable can be used.

Lynxmotion Smart Servo (LSS) - Serial Y Cables

Lynxmotion SKU: 100mm / 150mm / 200mm / 300mm

LSS-C-100-Y
LSS-C-150-Y
LSS-C-200-Y
LSS-C-300-Y

RB-Lyn-998
RB-Lyn-996
RB-Lyn-994
RB-Lyn-991

Plastic Cable Clip

Clip intended to be mounted to SES V2 brackets to help with wire routing. Magnets are meant to attach external shells.

Magnets for the Cable Clip

Small magnet used 

Extra Long Stacking Headers

These extra long stacking headers are intended to be use with the LSS Adapter and fit through the board. They are used to stack a shield above the LSS adapter and onto a shield compatible microcontroller.

Lynxmotion USB A to Mini B

• Length: 91.44cm / 36"

Lynxmotion USB A to Type C

• Length: 1m / 39.37"

Power Harness XT60 to XT30

• 1x XT60 Male
• 3x XT30 Female
• 3x XT30 Male with 30cm 16AWG cables