SES - Gearing
Version 109.1 by Eric Nantel on 2019/02/05 09:14
PICTURE | NAME / DESCRIPTION | SES V1 | SES V2 | Lynxmotion SKU | RobotShop SKU | CAD |
|---|---|---|---|---|---|---|
| Aluminum Driving Horn Aluminum driving horn has the SES V2 mounting pattern and inner 24 tooth "Hitec standard" spline. | ✓ | ✓ | LSS-DH |
| |
| Aluminum SES V2 Idler Horn Aluminum idler horn has the SES V2 mounting pattern and inner bore intended to be used with a 3mm bearing. | X | ✓ | LSS-IH |
| |
| Aluminum SES V2 Idler / Gear Spacer Spacer used with idler gears or horns | X | ✓ | LSS-FLG |
| |
| luminum SES V2 Gearbox Shaft Custom aluminum shaft specific to the SES V2 external gearbox. Needs to be supported by two 5mm bearings. One end is designed to connect to an external gear, while the other is design to connect to an idler. | X | ✓ | SG-SHF |
| |
| Aluminum SES V2 16 Tooth Driving Gear Custom 16 tooth aluminum gear with 24 tooth "Hitec standard" inner spline. Meant to be used with the 48 tooth idler gear to provide 1:3 external gearing. | X | ✓ | SG-16T-D |
| |
| Aluminum SES V2 32 Tooth Driving Gear Custom 32 tooth aluminum gear with 24 tooth "Hitec standard" inner spline. Meant to be used with the 32 tooth idler gear to provide a 1:1 gear ratio. Includes SES V2 mounting pattern. | X | ✓ | SG-32T-D |
| |
| Aluminum SES V2 32 Tooth Idler Gear Custom 32 tooth aluminum gear with hollow bore intended for 3mm bearing. Meant to be used with the 32 tooth driving gear to provide a 1:1 gear ratio. | X | ✓ | SG-32T-I |
| |
| Aluminum SES V2 48 Tooth Idler Gear Custom 48 tooth aluminum gear with hollow bore intended for 3mm bearing. Meant to be used with the 16 tooth driving gear to provide a 1:3 gear ratio. | X | ✓ | SG-48T-I |
| |
| Aluminum SES V2 Shaft Retainer Ring Fits inside either of the idler gears and holds it in place on the external shaft. | X | ✓ | SG-RTN |
| |
| Plastic Low Profile Gear Set Acetal gear set from our Low Profile Axis kit. Driving gear uses 24T spline while driven gear incorporates SES V1 pattern. Designed to be used with the aluminum servo side mount bracket. | ✓ | X | LPAGS-01 | RB-Lyn-368 |
