Aluminum Tubing Connector Hub

High quality anodized aluminum hub allows the aluminum tubing sections (AT-01 thru AT-06) to be connected to our servo brackets.

Aluminum Tubing Option Connector Hub

These hubs can be used with the ASB-19 and BBH-01 to make a lightweight but very strong tubing pivot. They will also be used for options not yet released.

Aluminum Clamping Hub for Carbon Fiber Tubing

Anodized aluminum clamping hub allows carbon fiber tubing to be connected to servo brackets. The pattern allows passing LSS cables.

50mm Carbon Fiber Tubing

This carbon fiber tubes is meant to be used with the aluminum clamping hub. 

75mm Carbon Fiber Tubing

This carbon fiber tubes is meant to be used with the aluminum clamping hub. 

100mm Carbon Fiber Tubing

This carbon fiber tubes is meant to be used with the aluminum clamping hub. 

Rubber End Cap

Rubber end cap intended to be used with the carbon fiber tubing.

Aluminum Servo Horn Tubing Adapter

These hubs allow any of our tubing sections (AT-01 thru AT-06) to be attached directly to a Hitec servos output shaft. There are lots of interesting uses for this unique hub.

Aluminum Tubing

High quality 0.50" 6061 T6 round aluminum tubing with mounting holes for mounting to our HUB-08. Designed to work with the servo tubing connector, servo tubing adapter and tubing option connector hub. Variety of different lengths available.

Choose length:

• 1.5" (AT-01)
• 2.25" (AT-05)
• 3.0" (AT-02)
• 3.375" (AT-06)
• 4.5" (AT-03)
• 6.0" (AT-04)
• 8.0" (AT-07)
• 10.0" (AT-08)
• 12.0" (AT-09)

Choose length:

• 1.5" (RB-Lyn-112)
• 2.25" (RB-Lyn-116)
• 3.0" (RB-Lyn-113)
• 3.375" (RB-Lyn-117)
• 4.5" (RB-Lyn-114)
• 6.0" (RB-Lyn-115)
• 8.0" (RB-Lyn-383)
• 10.0" (RB-Lyn-384)
• 12.0" (RB-Lyn-379)