Last modified by Eric Nantel on 2024/09/06 14:52
From version < 47.1 >
edited by Coleman Benson
on 2023/07/27 09:31
To version < 51.1 >
edited by Coleman Benson
on 2023/07/27 11:54
< >
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -149,7 +149,7 @@
149 149  | |[[**F**irst Position (**D**eg)>>||anchor="HFirstPosition"]]|(% style="text-align:center" %) |(% style="text-align:center" %)QFD|(% style="text-align:center" %)CFD|No value|1/10°|Reset required after change.
150 150  | |[[Maximum **S**peed in **D**egrees>>||anchor="HMaximumSpeedinDegrees28SD29"]]|(% style="text-align:center" %)SD|(% style="text-align:center" %)QSD|(% style="text-align:center" %)CSD|Max|0.1°/s|SD overwrites SR / CSD overwrites CSR and vice-versa
151 151  | |[[Maximum **S**peed in **R**PM>>||anchor="HMaximumSpeedinRPM28SR29"]]|(% style="text-align:center" %)SR|(% style="text-align:center" %)QSR|(% style="text-align:center" %)CSR|Max|RPM|SD overwrites SR / CSD overwrites CSR and vice-versa
152 -| |[[Step Mode>>doc:||anchor="HStepMode"]]|(% style="text-align:center" %)SM|(% style="text-align:center" %)QM|(% style="text-align:center" %)CSM|2|1, 2, 4|Numbers represent fractions: full step, &frac12; step, &frac14; step
152 +| |[[Step Mode>>doc:||anchor="HStepMode28SM29"]]|(% style="text-align:center" %)SM|(% style="text-align:center" %)QM|(% style="text-align:center" %)CSM|2|1, 2, 4|Numbers represent fractions: full step, &frac12; step, &frac14; step
153 153  
154 154  |(% colspan="8" style="color:orange; font-size:18px" %)[[**Modifiers**>>||anchor="HModifiers"]]
155 155  |(% style="width:25px" %) |(% style="width:200px" %)**Description**|(% style="text-align:center; width:100px" %)**Modifier**|(% style="text-align:center; width:75px" %)**Query**|(% style="text-align:center; width:75px" %)**Config**|(% style="width:100px" %)**Default**|(% style="width:170px" %)**Unit**|**Notes**
... ... @@ -163,7 +163,8 @@
163 163  | |[[**Q**uery **M**odel **S**tring>>||anchor="HQueryModelString28QMS29"]]|(% style="text-align:center" %) |(% style="text-align:center" %)QMS|(% style="text-align:center" %) | | |Returns the model of servo (ex: LSS-ST1, LSS-HS1, LSS-HT1)
164 164  | |[[**Q**uery **F**irmware Version>>||anchor="HQueryFirmware28QF29"]]|(% style="text-align:center" %) |(% style="text-align:center" %)QF|(% style="text-align:center" %) | | |
165 165  | |[[**Q**uery Serial **N**umber>>||anchor="HQuerySerialNumber28QN29"]]|(% style="text-align:center" %) |(% style="text-align:center" %)QN|(% style="text-align:center" %) | | |Returns the unique serial number for the servo
166 -| |**Q**uery **T**emperature **P**robe|(% style="text-align:center" %) |(% style="text-align:center" %)QTP|(% style="text-align:center" %) | | |Queries temperature probe fixed to stepper motor
166 +| |**Q**uery **T**emperature **P**robe|(% style="text-align:center" %) |(% style="text-align:center" %)QTP|(% style="text-align:center" %) | | |Queries temperature probe fixed to the stepper motor
167 +| |**Q**uery **T**emp of **M**CU|(% style="text-align:center" %) |(% style="text-align:center" %)QTM|(% style="text-align:center" %) | | |
167 167  | |**Q**uery **T**emp of **C**ontroller|(% style="text-align:center" %) |(% style="text-align:center" %)QTCW, QTCE|(% style="text-align:center" %) | | |(((
168 168  QTCW: Queries the temperature status of the motor controller (pre-warning)
169 169  
... ... @@ -556,23 +556,25 @@
556 556  
557 557  == Telemetry ==
558 558  
559 -====== __Query Voltage (**QV**)__ ======
560 +====== __Query PCB Temperature (**QT**)__ ======
560 560  
561 -Ex: #5QV<cr> might return *5QV11200<cr>
562 +Ex: #5QT<cr> might return *5QT564<cr>
562 562  
563 -The number returned is in milliVolts, so in the case above, servo with ID 5 has an input voltage of 11.2V.
564 +The units are in tenths of degrees Celcius, so in the example above, the servo's internal temperature is 56.4 degrees C. To convert from degrees Celcius to degrees Farenheit, multiply by 1.8 and add 32. Therefore 56.4C = 133.52F.
564 564  
565 -====== __Query Temperature (**QT**)__ ======
566 +====== Query Temperature Probe (**QTP**) ======
566 566  
567 -Ex: #5QT<cr> might return *5QT564<cr>
568 +Ex:
568 568  
569 -The units are in tenths of degrees Celcius, so in the example above, the servo's internal temperature is 56.4 degrees C. To convert from degrees Celcius to degrees Farenheit, multiply by 1.8 and add 32. Therefore 56.4C = 133.52F.
570 +====== Query Temp of Controller (**QTCW**, **QTCE**) ======
570 570  
571 -====== __Query Motor Driver Current (**QC**)__ ======
572 +Ex:
572 572  
574 +====== __Query Current (**QC**)__ ======
575 +
573 573  Ex: #5QC<cr> might return *5QC140<cr>
574 574  
575 -The units are in milliamps, so in the example above, the servo is consuming 140mA, or 0.14A. It represents the RMS value.
578 +The units are in milliamps, so in the example above, the servo is consuming 140mA, or 0.14A. It represents the RMS value. The query calculates the RMS value of the current sent from the motor driver to the stepper motor.
576 576  
577 577  ====== __Query Model String (**QMS**)__ ======
578 578  
... ... @@ -591,3 +591,17 @@
591 591  Ex: #5QN<cr> might return *5QN12345678<cr>
592 592  
593 593  The number in the response (12345678) would be the servo's serial number which is set and should not be changed by the user.
597 +
598 +====== __Query IMU Linear (**QIX**, **QIY**, **QIZ**)__ ======
599 +
600 +Ex: #6QIX<cr> might return *6QIX30<cr>
601 +
602 +This command queries servo 6's IMU's linear accelerometer in the X direction. The response is 30mm per second squared.
603 +
604 +__Query IMU Angular (**QIA**, **QIB**, **QIC**)__
605 +
606 +Ex: #6QIB<cr> might return *6QIB44<cr>
607 +
608 +This command queries servo 6's IMU's linear accelerometer in the X direction. The response is 4.4 degrees per second squared.
609 +
610 +
Copyright RobotShop 2018