Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -143,7 +143,6 @@
143	143	| |[[**A**ngular **A**cceleration>>||anchor="HAngularAcceleration"]]|(% style="text-align:center" %)AA|(% style="text-align:center" %)QAA|(% style="text-align:center" %)CAA|(% style="text-align:center" %) |(% style="text-align:center" %)0.01°/s^2|
144	144	| |[[**A**ngular **D**eceleration>>||anchor="HAngularDeceleration"]]|(% style="text-align:center" %)AD|(% style="text-align:center" %)QAD|(% style="text-align:center" %)CAD|(% style="text-align:center" %) |(% style="text-align:center" %)0.01°/s^2|
145	145	| |[[**G**yre Direction>>||anchor="HGyreDirection"]]|(% style="text-align:center" %)G|(% style="text-align:center" %)QG|(% style="text-align:center" %)CG|(% style="text-align:center" %)1|(% style="text-align:center" %)1 or -1|Gyre / rotation direction: 1= CW (clockwise) -1 = CCW (counter-clockwise)
146		-| |[[**F**irst Position (**D**eg)>>||anchor="HFirstPosition"]]|(% style="text-align:center" %) |(% style="text-align:center" %)QFD|(% style="text-align:center" %)CFD|(% style="text-align:center" %) |(% style="text-align:center" %)0.01°|Reset required after change.
147	147	| |[[Maximum **S**peed in **D**egrees>>||anchor="HMaximumSpeedinDegrees"]]|(% style="text-align:center" %)SD|(% style="text-align:center" %)QSD|(% style="text-align:center" %)CSD|(% style="text-align:center" %) |(% style="text-align:center" %)0.01°/s|SD / CSD overwrites SR / CSR
148	148	| |[[Maximum **S**peed in **R**PM>>||anchor="HMaximumSpeedinRPM"]]|(% style="text-align:center" %)SR|(% style="text-align:center" %)QSR|(% style="text-align:center" %)CSR|(% style="text-align:center" %) |(% style="text-align:center" %)RPM|SR / CSR overwrites SD / CSD
149	149
...	...	@@ -373,20 +373,23 @@
373	373	|(% style="width:25px" %) |***Value returned (Q)**|**Status**|**Detailed description**
374	374	| |ex: *5Q0<cr>|0: Unknown|LSS is unsure / unknown state
375	375	| |ex: *5Q1<cr>|1: Limp|Motor driving circuit is not powered and horn can be moved freely
376		-| |ex: *5Q2<cr>|2: Free moving|Servo is rotating in duty motion / free move using the RDM command
377		-| |ex: *5Q3<cr>|3: Accelerating|Increasing speed from rest (or previous speed) towards travel speed
378		-| |ex: *5Q4<cr>|4: Traveling|Moving at a stable speed
379		-| |ex: *5Q5<cr>|5: Decelerating|Decreasing from travel speed towards final position.
380		-| |ex: *5Q6<cr>|6: Holding|Keeping current position (in EM0 mode, return will normally be holding)
381		-| |ex: *5Q7<cr>|7: Outside limits|{More details coming soon}
382		-| |ex: *5Q8<cr>|8: Stuck|Motor cannot perform request movement at current speed setting
383		-| |ex: *5Q9<cr>|9: Blocked|Similar to stuck, but the motor is at maximum duty and still cannot move (i.e.: stalled)
384		-| |ex: *5Q10<cr>|10: Safe Mode|(((
385		-A safety limit has been exceeded (temperature, peak current or extended high current draw).
	375	+| |ex: *5Q2<cr>|2: Accelerating|Increasing speed from rest (or previous speed) towards travel speed
	376	+| |ex: *5Q3<cr>|3: Traveling|Moving at a stable speed
	377	+| |ex: *5Q4<cr>|4: Decelerating|Decreasing from travel speed towards final position.
	378	+| |ex: *5Q5<cr>|5: Holding|Keeping current position (in EM0 mode, return will normally be holding)
	379	+| |ex: *5Q6<cr>|6: Error|If the status is Error, the error value consists of binary flags
386	386
387		-Send a Q1 command to know which limit has been reached (described below).
388		-)))
	381	+|(% style="width:25px" %)
	382	+| | | |
	383	+| | | |
	384	+| | | |
	385	+| | | |
	386	+| | | |
	387	+| | | |
	388	+| | | |
389	389
	390	+*Value returned (Q)StatusDetailed description
	391	+
390	390	If a safety limit has been reached and exceeded, the LED will flash red and the servo will stop providing torque (no longer react to commands which cause the motor to rotate). In order to determine which limit has been reached, send a Q1 command. The servo must be RESET in order to return to normal operation, though if a limit is still detected (for example the servo is still too hot), it will revert back to Safe Mode.
391	391
392	392	|(% style="width:25px" %) |***Value returned (Q1)**|**Status**|**Detailed description**
...	...	@@ -556,25 +556,6 @@
556	556	)))
557	557
558	558	|(% colspan="2" %)(((
559		-====== __First Position__ ======
560		-)))
561		-|(% style="width:30px" %) |(((
562		-In certain cases, a user might want to have the servo move to a specific angle upon power up; we refer to this as "first position" (a.k.a. "initial position"). The factory default has no first position value stored in EEPROM and therefore upon power up, the servo remains limp until a position (or hold command) is assigned.
563		-
564		-Note that the number should be restricted to -1790 (-179.0 degrees) to +1790 (179.0 degrees) and values beyond this will be changed to 1800.
565		-
566		-Query First Position in Degrees (**QFD**)
567		-
568		-Ex: #5QFD<cr> might return *5QFD900<cr>The reply above indicates that servo with ID 5 has a first position of 90.0 degrees. If there is no first position value stored, the reply will be DIS.
569		-
570		-Configure First Position in Degrees (**CFD**)
571		-
572		-Ex: #5CFD900<cr>
573		-
574		-This configuration command means the servo, when set to smart mode, will immediately move to 90.0 degrees upon power up. Sending a CFD command without a number (Ex. #5CFD<cr>) results in the servo remaining limp upon power up. In order to remove the first position, send no value, ex: #5CFD<cr>
575		-)))
576		-
577		-|(% colspan="2" %)(((
578	578	====== __Maximum Speed in Degrees__ ======
579	579	)))
580	580	|(% style="width:30px" %) |(((