Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,40 +10,21 @@
10	10
11	11	The Lynxmotion Smart Servo PRO Configuration Software (“LSS PRO Config” for short) is intended to be a tool to quickly interact with the Lynxmotion Professional Smart Servos. Features include sending action and configuration commands, queries (and receiving the reply), updating the firmware, monitoring sensor data and more. The software works on Windows 7 operating systems and above.
12	12
13		-Note: The software can be connected to multiple servos, but the interface can only control and communicate with one at any time (unless using the free format commands described below). Each servo must have a unique ID. The servo(s) must be powered correctly and connected to the computer via USB from the first servo in the BUS.
	13	+NOTE: The software can be connected to multiple servos, but the interface can only control and communicate with one at any time (unless using the free format commands described below). Each servo must have a unique ID. The servo(s) must be powered correctly and connected to the computer via USB from the first servo in the BUS.
14	14
15		-(% class="wikigeneratedid" %)
16		-= Features =
17		-
18		-* Send action, configuration and query commands to an individual PRO servo
19		-* Obtain visual feedback from various onboard sensors
20		-* Create custom actions for testing purpose
21		-* Update PRO servo’s firmware
22		-* Auto-Update if connected to Internet
23		-
24	24	= User Guide =
25	25
26	26	[lorren Ipsum]
27	27
28		-(% class="wikigeneratedid" %)
29		-== Information ==
30		-
31		-[[image:LSS-P-Config-Info.png]]
32		-
33		-1. The Information (capital I) button at the top right of the interface leads to this user guide.
34		-
35	35	== Connection ==
36	36
37		-In order for the LSS PRO Config software to detect the servos, the correct USB to serial drivers must be installed on the computer. Windows will automatically detect and install the drivers.
38		-
39		-
40	40	[[image:LSS-P-Config-Connection.png]]
41	41
42		-1. Select the appropriate COM port
43		-1. Click on the "Connect" button (All servos in the communication BUS should be detected)
44		-1. Select a particular servo from the list
	23	+1. Select your COM port in the drop down menu.
	24	+1. Click on the "Connect" button.
	25	+1. In the "Select ID" drop down menu, you will find all the LSS-P actuator connected. Select the desired ID, the interface will then display and control that single actuator.
45	45
46		-Note: The interface will then display and control that single actuator.
	27	+The software will communicate with all the actuator connected to the CAN bus from the first actuator USB however only one at a time can be selected. Some functions are available as well using the "254 - All Servos" selection like the "Custom Actions" or "Free format command".
47	47
48	48	== Status ==
49	49
...	...	@@ -55,8 +55,6 @@
55	55	1. Status of what the actuator is currently doing. (A list of the different statuses is available HERE)
56	56	1. Errors that are happening. (A list of the different errors is available HERE)
57	57
58		-Note: Most errors will require the problem to be solved & the servo either Reset or set Limp.
59		-
60	60	== Query ==
61	61
62	62	[[image:LSS-P-Config-Query.png]]