Wiki source code of LSS-PRO Configuration Software
Version 25.1 by Eric Nantel on 2024/07/11 11:12
Hide last authors
 |
21.1 | 1 | [[image:LSS-P-Configuration-Software.png||width="350"]] |
| |
12.1 | 2 | |
| |
21.1 | 3 | [[image:[email protected]]] |
| |
1.2 | 4 | |
| 5 | **Table of Contents** | ||
| 6 | |||
| 7 | {{toc/}} | ||
| 8 | |||
| 9 | = Description = | ||
| |
21.1 | 10 | |
| |
23.1 | 11 | The Lynxmotion Smart Servo PRO Configuration Software (“LSS PRO Config” for short) is intended to be a tool to quickly interact with the Lynxmotion Professional Smart Servos. Features include sending action and configuration commands, queries (and receiving the reply), updating the firmware, monitoring sensor data and more. The software works on Windows 7 operating systems and above. |
| |
21.1 | 12 | |
| |
23.1 | 13 | NOTE: The software can be connected to multiple servos, but the interface can only control and communicate with one at any time (unless using the free format commands described below). Each servo must have a unique ID. The servo(s) must be powered correctly and connected to the computer via USB from the first servo in the BUS. |
| 14 | |||
| |
24.1 | 15 | = User Guide = |
| 16 | |||
| 17 | |||
| 18 | Interface |