Step 1 - Connections

Warning: Make sure your power supply is OFF and wait at least 10s before connecting to the LSS-P actuator.

• Connect the XT60 from your power supply

• Connect the USB Type-C cable

Step 2 - Power-Up

• Proceed with powering the actuator

Step 3 - Software

• Install the LSS PRO Configuration software (HERE)
• Open the LSS PRO Configuration software

Step 4 - Connection

• Select the COM port associated with your actuator
• Click Connect

Step 5 - Selection

• In the drop-down menu, select your actuator

Step 6 - Set the ID

• In the "Configuration" drop-down menu, select "CID / ID Number"
• In the text entry box, set the desired ID number
• Click on the "Send" button
• Click on the "Reset button

At that point your Actuator should have the new ID configured.