Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,0 +1,25 @@
	1	+= Connecting via USB =
	2	+
	3	+1. Connect the USB cable to the LSS Adapter board on your robot
	4	+1. Plug the USB connector into the PC
	5	+1. Connect your LSS to the LSS-Adapter with the Lynxmotion cable
	6	+1. Connect the power to the LSS Adapter via the yellow XT60 plug
	7	+1. Power on the robot (On/Off switch)
	8	+1. Start the LSS FlowArm software
	9	+1. Select the type of LSS Arm you are using (3 DoF / 4 DoF / 5 DoF)
	10	+1. It will automatically try to find the connected Arm but, if not, you can manually choose the appropriate COM port from the drop-down list & the baud rate (default is 115200)
	11	+1. The software sends a query to servo ID1 and once a reply is received, it determines connection has been established and a green light will be displayed aside the COM port.
	12	+
	13	+== Calibration ==
	14	+
	15	+1. Go in "TEACH" mode with the button on the top bar.
	16	+1. Manually place the arm in the correct position for your model and with the gripper closed.
	17	+
	18	+(% style="width:700px" %)
	19	+|(% style="text-align:center" %)**LSS - 4 DoF Arm **|(% style="text-align:center" %)**LSS - 3 DoF Arm **
	20	+|{{lightbox image="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v2-robots/ses-v2-arms/lss-4dof-arm/4dof-arm-quickstart/4dof-servo-setup/WebHome/SESV2-LSS-ARTICULATED-ARM-IDS.PNG" width="350"/}}|{{lightbox image="https://wiki.lynxmotion.com/info/wiki/lynxmotion/download/servo-erector-set-robots-kits/ses-v2-robots/ses-v2-arms/lss-3-dof-arm/3dof-arm-quickstart/3dof-servo-setup/WebHome/LSS-3DOF-IDS.PNG?=" width="350"/}}
	21	+| |Gripper servo ID already assigned via LSS-2IO
	22	+
	23	+1. Store the values or Offsets by clicking "STORE OFFSETS"
	24	+1. At that point the arm should "stay" in that position once released
	25	+1. Exit the "TEACH" mode by clicking it again