Changes for page LSS Configuration Software
Last modified by Eric Nantel on 2024/07/12 11:23
Change comment: There is no comment for this version
Summary
-
Page properties (4 modified, 0 added, 0 removed)
-
Attachments (0 modified, 4 added, 51 removed)
- LSS Config - 20.7.3 - Firmware update.png
- LSS Config - 20.7.3 - Screenshot.png
- LSS_Config_Setup.zip
- lss-config-1000px.png
- lss-config-10s.jpg
- lss-config-20.7.14.2-carets-angular-range-64.png
- lss-config-20.7.14.2-carets-angular-range.png
- lss-config-20.7.14.2-carets-first-position-64.png
- lss-config-20.7.14.2-carets-first-position.png
- lss-config-20.7.14.2-carets-offset-64.png
- lss-config-20.7.14.2-carets-offset.png
- lss-config-20.7.14.2-carets-position-64 .png
- lss-config-20.7.14.2-carets-position.png
- lss-config-20.7.14.2-carets-speed-64.png
- lss-config-20.7.14.2-carets-speed.png
- lss-config-20.7.14.2-header-controls-connected.png
- lss-config-20.7.14.2-header-controls-lss-selected.png
- lss-config-20.7.14.2-header-controls-not-connected.png
- lss-config-20.7.14.2-popup-firmware-update-lss-none.png
- lss-config-20.7.14.2-scan-options.png
- lss-config-20.7.14.2-terminal-doublestar-bold.png
- lss-config-300s.jpg
- lss-config-30s.jpg
- lss-config-60s.jpg
- lss-config-control-0003-both.png
- lss-config-control.jpg
- lss-config-display-query-off.jpg
- lss-config-display-query.jpg
- lss-config-export-graph-icon.jpg
- lss-config-firmware-update-restore-settings.png
- lss-config-full-window-0001.png
- lss-config-infs.jpg
- lss-config-marker-circle.jpg
- lss-config-marker-diamond.jpg
- lss-config-marker-square.jpg
- lss-config-pause-icon-yellow.jpg
- lss-config-pause-icon.jpg
- lss-config-play-icon-green.jpg
- lss-config-play-icon.jpg
- lss-config-record-icon-red.jpg
- lss-config-record-icon.jpg
- lss-config-scan.jpg
- lss-config-stop-icon.jpg
- lss-config-telemetry-graph.png
- lss-config-temperature-celcius.jpg
- lss-config-temperature-faren.jpg
- lss-config-terminal-0001.png
- lss-config-top-menu.jpg
- lss-config-visibility-off.jpg
- lss-config-visibility.jpg
- wiki-download.png
- LSS-Config-BETA.png
- lss-config-command-line.jpg
- lss-config-connect-firmware.jpg
- lss-config-firmware-update.jpg
Details
- Page properties
-
- Parent
-
... ... @@ -1,1 +1,1 @@ 1 - lynxmotion-smart-servo.WebHome1 +Lynxmotion Smart Servo (LSS).WebHome - Hidden
-
... ... @@ -1,1 +1,1 @@ 1 - false1 +true - Tags
-
... ... @@ -1,1 +1,0 @@ 1 -LSS-Ref|LSS-Config|LSS - Content
-
... ... @@ -1,215 +1,88 @@ 1 - {{lightbox image="lynxmotion-smart-servo.lss-configuration-software.WebHome@LSS20.7.3 - Screenshot.png" title="LSS Config - 20.7.3 - Screenshot"width="600"/}}1 +[[image:LSS-Config-BETA.png||width="350"]] 2 2 3 -[[[[image:wiki-download.png]]>>attach:LSS_Config_Setup.zip]] 4 - 3 +(% class="wikigeneratedid" id="HTableofContents" %) 5 5 **Table of Contents** 6 6 7 7 {{toc/}} 8 8 9 -= Description = 10 10 11 - The LSS Configurationsoftware ("LSS Config" for short) is intendedto provide easy access to the main features and functionality of the [[Lynxmotion Smart Servo Motors>>doc:ses-v2.lynxmotion-smart-servo.WebHome]], as well as providingaccess to firmwareupdates.9 +//{Work in Progress}// 12 12 13 - NOTE: Thesoftwarecan beconnectedtomultiple servos, but theinterfacecanonlycontroloneatany time.Theservo(s) must beowered correctlyandinserialmode. Shouldyourservo(s) NOTbe in serialmode,pleasereferto the [[button menu>>doc:ses-v2.lynxmotion-smart-servo.lss-button-menu.WebHome]].11 +The beta version of the LSS Config is available [[here>>http://www.lynxmotion.com/tools/LSS Config (BETA).rar]] (password = beta). More features coming soon! :) 14 14 15 - =Features=13 +The LSS Configuration software ("LSS Config" for short) is intended to provide easy access to the main features and functionality of the [[Lynxmotion Smart Servo Motors>>doc:Lynxmotion Smart Servo (LSS).WebHome]], as well as providing access to firmware updates. 16 16 17 - ==Connection==15 +NOTE: Only one servo should be connected to the software at any time. The servo must be powered correctly and in serial mode. Should your servo NOT be in serial mode, please refer to the [[button menu>>doc:Lynxmotion Smart Servo (LSS).LSS - Button Menu.WebHome]]. 18 18 19 -{{lightbox image="lynxmotion-smart-servo.lss-configuration-software.WebHome@lss-config-20.7.14.2-header-controls-not-connected.png" title="LSS Config - 20.7.14.2 - Header controls (not connected)" width="552" group="header"/}} 17 +(% class="wikigeneratedid" id="HHeader" %) 18 +Header 20 20 21 - {{lightbox image="lynxmotion-smart-servo.lss-configuration-[email protected]header-controls-connected.png" title="LSS Config - 20.7.14.2 - Header controls (connected, before scan)" width="552" group="header"/}}20 +[[image:lss-config-header.png]] 22 22 23 -{{lightbox image="lynxmotion-smart-servo.lss-configuration-software.WebHome@lss-config-20.7.14.2-header-controls-lss-selected.png" title="LSS Config - 20.7.14.2 - Header controls (LSS selected, after scan)" width="552" group="header"/}} 24 24 23 +(% class="wikigeneratedid" id="HConnection" %) 24 +Connection 25 25 26 - The headers above showthe three main states (from topto bottom):26 +Connection to the servo is done automatically, via any properly installed USB to serial interface like the [[LSS Adapter board>>doc:Servo Erector Set (SES) Building System.SES - Electronics.SES - Modules.LSS - Adapter Board.WebHome]]. Ensure the board is recognized by the computer and if not, install the proper drivers. The software automatically scans all standard baud rates using ID254 (broadcast ID) and waits for a reply from the servo connected. Should an incorrect COM port be selected, the software will keep trying to connect. You must disconnect, select the correct COM port and reconnect. If you are not sure which COM port to select, in Windows, go to Device Manager -> Ports (COM & LPT) and select the port associated with the USB to serial device. 27 27 28 -* Before a connection is made 29 -* After a connection, before a scan 30 -* After a scan with a LSS selected 28 +(% class="wikigeneratedid" id="HFirmwareUpdate" %) 29 +Firmware Update 31 31 32 - The header includes(left toright):31 +[[image:lss-config-firmware-update.png]] 33 33 34 -* COM port selection 35 -* CONNECT / DISCONNECT (toggle ON / OFF) 36 -* SCAN: (popup) scans the bus for all available servo motors 37 -* SERVO LIST: Servo selected via the dropdown menu 38 -* FIRMWARE: (popup) used to update servo's firmware 39 -* WIKI (link to the LSS Config guide on the Lynxmotion Wiki) 40 40 41 - ===COMPort===34 +The LSS Config serves as the main software to update the servo's onboard firmware / programming. An internet connection is needed in order for the software to check if an online update is available. 42 42 43 - Connection to the servoisdone automatically via any properly installed USB to serial interfacelike the [[LSS Adapterboard>>doc:servo-erector-set-system.ses-electronics.ses-modules.lss-adapter-board.WebHome]]. Oncetheservoisowered and properlyconnected to thecomputer,theCOM portshould appear intheCOMportlist.Ensurethe board isrecognizedbythecomputer andif not, installthe properdrivers. If you havemultiple communicationportsactive, go to Windows-> Device Manager to determinewhichisappropriateforthe USB to serialadapteryouareusing. Click CONNECT toconnecttothe servo. If youwish to change the COMport selectedyou mustdisconnect,selectthecorrect COM port and reconnect.36 +The servo's current firmware version is displayed to the left of the FIRMWARE button. Pressing the button will open a popup window which allows you to select the firmware version to upload to the servo. 44 44 45 - If you areotsure whichCOM port to select, in Windows,goto DeviceManager-> Ports (COM & LPT) andselectthe portassociatedwiththeUSB to serialdevice. If it isstill not clear which is theproperCOM port,simplydisconnectandreconnectheUSB cable withDeviceManageropen.The properCOM portwilldisapear(when disconnecting the USB cable)andreappear(when connecting the USB cable).38 +When checked, the Exp. button will allow experimental versions of the firmware to be displayed in the list. It also allows to load directly from a local file. 46 46 47 - ===Scan===40 +Once the OK button is pressed, a progress bar will be displayed in the command line. Do not disconnect the servo during a firmware update. If the process does get interrupted, you can still upload firmware to the LSS by going into bootloader mode by holding the button at power up. 48 48 49 -{{lightbox image="lynxmotion-smart-servo.lss-configuration-software.WebHome@lss-config-20.7.14.2-scan-options.png" title="LSS Config - 20.7.14.2 - Scan options" width="124"/}} 42 +(% class="wikigeneratedid" id="HServoControlA05Bcomingsoon5D" %) 43 +Servo Control [coming soon] 50 50 51 -The nextstep once the COM port has been selected is toscan the port. The software cansend commandsto (and listen fora reply from) allservo IDs (0 to 250) at all standard baud rates on the selected COM port. Inthe pop-up, select the baud rates which you wouldlike tocan.Youpressthe **ALL** buttonto select all baud rates, press the individualcheck boxes to toggleeach selector pressthe**<<** button toselect only the correspondingbaudrate, deselectingall others.You mayalso limit theIDstoscan for.When in doubt, leave all baudrates selected.45 +The servo control section allows you to visually move the servo and change a variety of parameter. 52 52 53 - Once you press OK, thescan will start by turningoff theLED of all servos on theselectedbaud rates (#254LED0\r).Then,each selectedbaud rate is scanned for servos. The commandline interfacewillinclude messages for all servos found(or not found)ateachbaud rate, as well as anyconflictsdiscovered(twoor more LSS atthe samelocation).In this case, a location is defined as a baud rate and ID pair.47 +The large red STOP button will send a LIMP command to the servo. 54 54 55 - This process will take a few seconds and once completed, a list of all available servos with which thesoftware was able to communicatewill appear in the list next to "Servo" (in the top orange Connection field of the interface) as a drop-down. All servos correctly identified on the bus will have their LED turn green (session specific as opposed to configured) to indicate no conflict. If two or more servos have the same ID, those servo's LED will turn red for that session, indicating an issue or overlap in IDs. To resolve this, you will need to change the ID of those servos to be distinct (they will need to be connected individually/separately from the other conflicting servos).49 +{More to come} 56 56 57 -**GREEN LED**: No Conflict 51 +(% class="wikigeneratedid" id="HConfigurations" %) 52 +Configurations 58 58 59 - **RED LED**:Conflict Found54 +[[image:lss-config-configurations.png]] 60 60 61 - NotethattheseLED colorsareSESSIONspecific(asopposed toconfigured).The LEDcolorlistedunder Configurationswillremain theuserchoice(OFF bydefault).56 +Upon connection, the software will read all configuration values and update the values in the "configurations" section. Visit the [[LSS Communication Protocol>>doc:Lynxmotion Smart Servo (LSS).LSS - Communication Protocol.WebHome]] page for more information about commands, actions and configurations. 62 62 63 - ===Servo===58 +Changing the values will not affect the session. Values which have been changed will have a yellow background. The values which can be entered are restricted to what the servo can accept; for example, servo IDs must be below 250. 64 64 65 -T hescan providesa listfallservoswhich have been detected on the busandliststhe followingchoices in thedrop-down. Note thatthe lastservo in thelistsautomaticallyselectedforconvenience.60 +**UPDATE** Pressing this button will write all values to EEPROM, changing the configurations, and reverting all background colors to white. 66 66 67 -** LSS-None(???;~-~--k)**62 +**UNDO ALL** is a shortcut button which reverts all changes made which have not been written to EEPROM. 68 68 69 -This first option is used only when a servo ("???" to signify "unknown servo") cannot be reached via the LSS Config software and needs to be manually set to bootloader mode via the button menu in order to re-flash the firmware. The telemetry graph and configurations are all greyed out when this is selected. Once the servo has been set manually to bootloader mode, select this option and go through the firmware update procedure. This normally only needs to be done as a "last resort". 70 - 71 -Note: You can use this special firmware recovery function with 2 or more servos simultaneously. Just make sure they are all in bootloader mode before stating the firmware update using this option. 72 - 73 -**LSS-All (254; ~-~--k)** 74 - 75 -This option allows actions that affect all detected servos in the list after a successful scan. Since there is no particular servo being monitored, the telemetry graph and configurations are all greyed out. This is used to send the same firmware update to all detected servos on the bus or to send the same action command via the command line interface described below. 76 - 77 -The drop-down list will be populated with all servos which the software has found on the bus, indicating their servo model, ID and firmware version. Each servo will then be listed in the following format: 78 - 79 -**ST1 (0;115.2k [368])** 80 - 81 -The servo model is displayed first (ST1, HS1, HT1), followed by its ID, the baud rate to which it has been st (ex. 115200, or 115.2k) and its firmware version in rectangular brackets. Selecting a servo from the list will allow the software to communicate with it. 82 - 83 -== Firmware Update == 84 - 85 -{{lightbox image="lynxmotion-smart-servo.lss-configuration-software.WebHome@LSS Config - 20.7.3 - Firmware update.png" width="416"/}} 86 - 87 -The firmware update option is a popup which includes: 88 - 89 -* Firmware version selection in a dropdown list, including the current recommended version 90 -* Experimental firmware (optional) 91 -* Cancel firmware update 92 -* OK to continue firmware update 93 -* Checkbox to try to save & restore the settings (config) 94 -* Notes regarding the selected firmware 95 - 96 -The LSS Config serves as the main software used to update the servo's onboard firmware. An internet connection is needed in order for the software to check if an online update is available and obtain a copy. When checked, the Exp. button will allow experimental versions of the firmware to be displayed in the list. It also allows to load a firmware directly from a local file. 97 - 98 -Following this pop-up your servo will be restarted (unless already in bootloader mode, see LSS-None above) and a progress bar will be displayed in the command line. Do not disconnect the servo during a firmware update. If the process does get interrupted, you can still upload firmware to the LSS by going into bootloader mode by holding the button at power up. 99 - 100 -__**NOTE: Before assembling the servos as part of a robot, check to see if there is a firmware update available.**__ 101 - 102 -== Servo Control == 103 - 104 -{{lightbox image="lss-config-control-0003-both.png" width="485"/}} 105 - 106 -The servo control section allows you to visually move the servo and change a variety of parameters, including: 107 - 108 -* [[image:lss-config-20.7.14.2-carets-position-64 .png]]Position: pale blue caret 109 -* [[image:lss-config-20.7.14.2-carets-offset-64.png]]Origin offset: magenta caret 110 -* [[image:lss-config-20.7.14.2-carets-angular-range-64.png]]Angular range: magenta square carets 111 -* [[image:lss-config-20.7.14.2-carets-speed-64.png]]RPM: green arrow / indicator 112 -* [[image:lss-config-20.7.14.2-carets-first-position-64.png]]Initial position: dark blue caret 113 - 114 -At the lower left the servo model and the LED color (session value) are shown. 115 - 116 -To change a value, simple use the left mouse button to hold and drag the relevant caret around its ring. Letting go of the left mouse button will update the value right away. While holding the left mouse button you can also press the right mouse button to cancel the current change to that caret (happens after right mouse click and then letting go of the left mouse button). 117 - 118 -If the caret moved is position, this will send a position command in tenths of degrees right away to the servo (#[id]D[pos]\r). 119 -If the caret moved is first position, offset or angular range then it will update the appropiate configuration (see below for details), pending an update confirmation. 120 -The speed caret cannot be moved directly; it only serves only as a display of the current speed. 121 - 122 -== Configurations == 123 - 124 -{{lightbox image="lss-config-configurations.jpg" width="350"/}} 125 - 126 -Upon connection, the software will read all configuration values and update the values in the "configurations" section. Visit the [[doc:lynxmotion-smart-servo.lss-communication-protocol.WebHome]] page for more information about commands, actions and configurations. 127 - 128 -Changing the values will not affect the session. Values which have been changed will have a yellow background. The values which can be entered are restricted to what the servo can accept; for example, servo IDs must be below 250. 129 - 130 -Each command is associated with the following protocol. Additional details for each can be found on the [[LSS Communication Protocol>>doc:lynxmotion-smart-servo.lss-communication-protocol.WebHome]] page. 131 - 132 -(% style="margin-right:auto" %) 133 -|Field|Command|Update? 134 -|Pos 1/10 & Send|**D **(position in 1/10 degrees)|No 135 -|E-STOP|**L** (limp)|No 136 -|Hold|**H** (Halt & Hold)|No 137 -|Servo ID|**CID** (Configure servo ID)|Yes 138 -|Baud Rate|**CB** (Configure Baud rate)|Yes 139 -|Origin Offset|**CO** (Configure Origin Offset)|Yes 140 -|Angular Rng|**CAR** (Configure Angular Range)|Yes 141 -|Gyre Dir|**CG** (Configure Gyre direction)|Yes 142 -|LED Color|**CLED** (Configure LED)|Yes 143 -|First Pos. & Active & Value:|**CFP** (Configure First Position), toggle active & input value|Yes 144 -|Max Speed (RPM)|**CSD **(Configure maximum Speed in Degrees)|Yes 145 -|Stiffness|**CAH** (Configure Angular Holding stiffness)|Yes 146 - 147 -**UPDATE** Pressing this button will write all values to EEPROM, changing the configurations, and reverting all background colors to white. 148 - 149 -**UNDO ALL** is a shortcut button which reverts all changes made which have not been written to EEPROM. 150 - 151 151 **SMART** / **RC POS** / **RC WHL**: This is a shortcut to change the servo's mode (LSS Smart Serial / RC PWM Position / RC PWM Wheel). IMPORTANT NOTE: Should you select either of the two RC modes, the LSS Config software will no longer be able to communicate with the servo. You must use the button menu to return to LSS serial mode (hold the button, release, press twice). 152 152 153 -== Telemetry Graph == 66 +(% class="wikigeneratedid" id="HTelemetryGraph5Bcomingsoon5D" %) 67 +Telemetry Graph [coming soon] 154 154 155 -The sensor graphing feature of the software allows you to select, 69 +The sensor graphing feature of the software allows you to select, display and record, with respect to time, the output from all of the servo's sensors. 156 156 157 -{ {lightboximage="lss-config-telemetry-graph.png" width="521"/}}71 +{More to come} 158 158 159 -x-Axis: seconds 73 +(% class="wikigeneratedid" id="HCommandLine" %) 74 +Command Line 160 160 161 -* Position: blue 162 -* Speed: green 163 -* Current: red 164 -* Voltage: yellow 165 -* Temperature: gray 76 +[[image:lss-config-command-line.jpg||alt="LSS Config Command Line"]] 166 166 167 -|(% style="width:76px" %)[[image:lss-config-visibility.jpg]]|(% style="width:488px" %)Sensor Feedback Visibility (ON)|(% style="width:137px" %)[[image:lss-config-visibility-off.jpg]]|(% style="width:777px" %)Sensor Feedback Visibility (OFF) 168 -|(% style="width:76px" %)[[image:lss-config-display-query.jpg]]|(% style="width:488px" %)Query value (ON)|(% style="width:137px" %)[[image:lss-config-display-query-off.jpg]]|(% style="width:777px" %)Query value (OFF) 169 -|(% style="width:76px" %)[[image:lss-config-play-icon.jpg]]|(% style="width:488px" %)Graphing (OFF)|(% style="width:137px" %)[[image:lss-config-play-icon-green.jpg]]|(% style="width:777px" %)Graphing (ON) 170 -|(% style="width:76px" %)[[image:lss-config-pause-icon.jpg]]|(% style="width:488px" %)Pause queries (OFF)|(% style="width:137px" %)[[image:lss-config-pause-icon-yellow.jpg]]|(% style="width:777px" %)Pause Queries (ON) 171 -|(% style="width:76px" %)[[image:lss-config-record-icon.jpg]]|(% style="width:488px" %)Record Sensor Queries (Not Recording)|(% style="width:137px" %)[[image:lss-config-record-icon-red.jpg]]|(% style="width:777px" %)Record Sensor Queries (Recording) 172 -|(% style="width:76px" %)[[image:lss-config-stop-icon.jpg]]|(% style="width:488px" %)Reset Graph|(% style="width:137px" %) |(% style="width:777px" %) 173 -|(% style="width:76px" %)[[image:lss-config-export-graph-icon.jpg]]|(% style="width:488px" %)Export recording to .csv (comma separated values)|(% style="width:137px" %) |(% style="width:777px" %)((( 174 -Export popup appears providing three options: 78 +The custom command line interface both allows you to communicate directly with an individual servo, send commands to it (and view replies), as well as get responses to queries from the software. 175 175 176 -1) Export only recorded data ("YES") 2) Export all data (click "NO") 3) Cancel export 177 -))) 178 -|(% style="width:76px" %)[[image:lss-config-temperature-celcius.jpg]]|(% style="width:488px" %)Temperature Units (Celcius)|(% style="width:137px" %)[[image:lss-config-temperature-faren.jpg]]|(% style="width:777px" %)Temperature Units (Fahrenheit) 179 -|(% style="width:76px" %)[[image:lss-config-marker-circle.jpg]]|(% style="width:488px" %)Marker Icon Style (Circle)|(% style="width:137px" %)[[image:lss-config-marker-diamond.jpg]] [[image:lss-config-marker-square.jpg]]|(% style="width:777px" %)Marker Icon Style (Diamond / Square) 180 -|(% style="width:76px" %)[[image:lss-config-10s.jpg]]|(% style="width:488px" %)Time Window (10s)|(% style="width:137px" %)((( 181 -[[image:lss-config-30s.jpg]] [[image:lss-config-60s.jpg]] 182 -[[image:lss-config-300s.jpg]] [[image:lss-config-infs.jpg]] 183 -)))|(% style="width:777px" %)Time Window (30s / 60s / 300s / Total) 80 +~>>: Command sent to the servo 184 184 185 -(% class="wikigeneratedid" %) 186 -Note that when multiple servos are connected, and the user changes between servos, the telemetry graph is not cleared (use the reset graph button). 82 +<<: Reply from the servo 187 187 188 -(% class="wikigeneratedid" %) 189 -Occasionally the telemetry values may all simultaneously drop to zero for one reading, or skip a point due to other processes taking priority. 84 +The software also auto-completes each command by automatically inserting "#[ID] before each command. For example, rather than typing #4D230<cr>, you need only type D230 and the software will automatically add #4 190 190 191 - ==Command line==86 +Left clicking a line highlights that line and allows it to be copied to the clipboard by pressing the right mouse button. 192 192 193 -{{lightbox image="lss-config-terminal-0001" width="521"/}} 194 - 195 -The command line interface both allows you to communicate directly with an individual servo, send commands to it and view replies to queries. When "LSS-All (254; ~-~--k)" is selected in the list of servos, the command line is used to send the same action or configuration command to all detected servos. For example, typing D1800 and pressing enter will send that same position command to each of the detected servos. 196 - 197 -Within the command interface, you might see the following: 198 - 199 -|(% style="width:114px" %)**>>**|(% style="width:1364px" %)Command sent to the servo 200 -|(% style="width:114px" %)**<<**|(% style="width:1364px" %)Reply from the servo 201 -|(% style="width:114px" %)**INF ::**|(% style="width:1364px" %)Information 202 -|(% style="width:114px" %)**[bootloader]**|(% style="width:1364px" %)Information specific to bootloader mode & firmware updates 203 -|(% style="width:114px" %)**]]**|(% style="width:1364px" %)Failure 204 -|(% style="width:114px" %)[[image:lss-config-20.7.14.2-terminal-doublestar-bold.png]]|(% style="width:1364px" %)Configuration command redirected to config interface (left hand side) 205 - 206 -The command line also auto-completes each command by automatically inserting "#[id]" before each command for you. Therefore, you only need to type the command itself, such as "D1000" and press [enter]. For example, rather than typing #4D230<cr>, you need only type D230 and the software will automatically add #4 & \r. 207 - 208 -Left clicking a line within the command prompt and then right clicking using your mouse highlights that line in a green border and allows it to be copied to the clipboard and pasted into another document. Scrolling is opposite that to browser navigation. 209 - 210 -The mouse wheel can be used to scroll and the holding the middle mouse button down allows for panning over the command line area (useful if text extends to the right). There are also two scrolling bars that can be used with the left mouse button as normal for panning the command line view. 211 - 212 -= Tutorials = 213 - 214 -* [[doc:lynxmotion-smart-servo.lss-configuration-software.lss-config-configure-ids.WebHome]] 215 -* [[doc:lynxmotion-smart-servo.lss-configuration-software.lss-config-firmware-update.WebHome]] 88 +{More to come}
- LSS Config - 20.7.3 - Firmware update.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -25.3 KB - Content
- LSS Config - 20.7.3 - Screenshot.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -246.8 KB - Content
- LSS_Config_Setup.zip
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.ENantel - Size
-
... ... @@ -1,1 +1,0 @@ 1 -3.6 MB - Content
- lss-config-1000px.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.ENantel - Size
-
... ... @@ -1,1 +1,0 @@ 1 -279.7 KB - Content
- lss-config-10s.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.6 KB - Content
- lss-config-20.7.14.2-carets-angular-range-64.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -426 bytes - Content
- lss-config-20.7.14.2-carets-angular-range.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -400 bytes - Content
- lss-config-20.7.14.2-carets-first-position-64.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -348 bytes - Content
- lss-config-20.7.14.2-carets-first-position.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -322 bytes - Content
- lss-config-20.7.14.2-carets-offset-64.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -404 bytes - Content
- lss-config-20.7.14.2-carets-offset.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -362 bytes - Content
- lss-config-20.7.14.2-carets-position-64 .png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -420 bytes - Content
- lss-config-20.7.14.2-carets-position.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -390 bytes - Content
- lss-config-20.7.14.2-carets-speed-64.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -371 bytes - Content
- lss-config-20.7.14.2-carets-speed.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -334 bytes - Content
- lss-config-20.7.14.2-header-controls-connected.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -5.0 KB - Content
- lss-config-20.7.14.2-header-controls-lss-selected.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -5.2 KB - Content
- lss-config-20.7.14.2-header-controls-not-connected.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -4.7 KB - Content
- lss-config-20.7.14.2-popup-firmware-update-lss-none.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -10.1 KB - Content
- lss-config-20.7.14.2-scan-options.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -12.2 KB - Content
- lss-config-20.7.14.2-terminal-doublestar-bold.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -289 bytes - Content
- lss-config-300s.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.9 KB - Content
- lss-config-30s.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.7 KB - Content
- lss-config-60s.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.7 KB - Content
- lss-config-control-0003-both.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -120.3 KB - Content
- lss-config-control.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -69.8 KB - Content
- lss-config-display-query-off.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -2.6 KB - Content
- lss-config-display-query.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.9 KB - Content
- lss-config-export-graph-icon.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.9 KB - Content
- lss-config-firmware-update-restore-settings.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -7.1 KB - Content
- lss-config-full-window-0001.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.ENantel - Size
-
... ... @@ -1,1 +1,0 @@ 1 -245.7 KB - Content
- lss-config-infs.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.8 KB - Content
- lss-config-marker-circle.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.7 KB - Content
- lss-config-marker-diamond.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.9 KB - Content
- lss-config-marker-square.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.6 KB - Content
- lss-config-pause-icon-yellow.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.8 KB - Content
- lss-config-pause-icon.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.4 KB - Content
- lss-config-play-icon-green.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -2.2 KB - Content
- lss-config-play-icon.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.6 KB - Content
- lss-config-record-icon-red.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -2.0 KB - Content
- lss-config-record-icon.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.6 KB - Content
- lss-config-scan.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -44.6 KB - Content
- lss-config-stop-icon.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.9 KB - Content
- lss-config-telemetry-graph.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -60.7 KB - Content
- lss-config-temperature-celcius.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -2.1 KB - Content
- lss-config-temperature-faren.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -2.0 KB - Content
- lss-config-terminal-0001.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.RB1 - Size
-
... ... @@ -1,1 +1,0 @@ 1 -13.2 KB - Content
- lss-config-top-menu.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -22.0 KB - Content
- lss-config-visibility-off.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.1 KB - Content
- lss-config-visibility.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -1.8 KB - Content
- wiki-download.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -xwiki:XWiki.CBenson - Size
-
... ... @@ -1,1 +1,0 @@ 1 -3.9 KB - Content
- LSS-Config-BETA.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +xwiki:XWiki.ENantel - Size
-
... ... @@ -1,0 +1,1 @@ 1 +292.7 KB - Content
- lss-config-command-line.jpg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +xwiki:XWiki.RB1 - Size
-
... ... @@ -1,0 +1,1 @@ 1 +18.2 KB - Content
- lss-config-connect-firmware.jpg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +xwiki:XWiki.RB1 - Size
-
... ... @@ -1,0 +1,1 @@ 1 +10.4 KB - Content
- lss-config-firmware-update.jpg
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +xwiki:XWiki.RB1 - Size
-
... ... @@ -1,0 +1,1 @@ 1 +23.5 KB - Content