Wiki source code of LSS Config - Setting IDs
Version 12.1 by Eric Nantel on 2019/05/21 10:53
Hide last authors
 |
2.1 | 1 | Material needed / suggested: |
| 2 | |||
| 3 | LSS Servo | ||
| 4 | |||
| 5 | LSS Adapter | ||
| 6 | |||
| 7 | LSS Power Supply | ||
| 8 | |||
| |
5.1 | 9 | USB Cable |
| |
2.1 | 10 | |
| |
5.1 | 11 | |
| |
10.1 | 12 | 1. Set LSS Adapter to USB mode |
| |
2.1 | 13 | 1. Connect the Supply & USB to the Adapter |
| 14 | 1. Connect your LSS Servo to the Adapter | ||
| 15 | 1. Open the LSS Config | ||
| 16 | 1. Connect | ||
| |
5.1 | 17 | 1. Set the servo ID & Update |
| |
2.1 | 18 | 1. Apply a post-it |
| |
5.1 | 19 | 1. Next servo / to Step 2 |
| 20 | |||
| |
10.1 | 21 | |(% style="width:350px" %) | |
| 22 | | | | ||
| 23 | | | | ||
| 24 | | | | ||
| 25 | | | | ||
| |
7.1 | 26 | |
| |
8.1 | 27 | |
| |
9.1 | 28 | |
| |
10.1 | 29 |