LSS-Config  - Configure IDs

Version 124.1 by Eric Nantel on 2022/02/08 10:26

What's Needed

LSS - ServosModulesWiringWiringWall Adapters 
LSS-XXXLSS-ADALSS-C-XXXUSB-0212V-XT60 
LSS-Servo.PNGLSS-ADA.pngLSS-C-100.pngUSB-Cable-A-Mini.PNGBX-12006000-XT60.PNG 
LSS - ConfigSES - Misc    
Config SoftwareID - Stickers    
Lynxmotion-Icon.pngLSS-Servo.PNG    

LSS Configuration Software - Configure IDs
Step 1/9
1x LSS-ADA
LSS Adapter Board










Comments:Set the LSS Adapter Board to USB mode with the mode switch

LSS Configuration Software - Configure IDs
Step 2/9
1x USBC-02
USB to Mini B
1x 12V-XT60
12V w/ XT60








Comments:Connect both USB and power cables to the LSS Adapter

LSS Configuration Software - Configure IDs
Step 3/9
1x LSS-XXX
Any LSS Servo
1x LSS-C-XXX
LSS Cable








Comments:Connect the LSS cable between the LSS Adapter and the LSS. At that point you can flip the ON switch on your power supply.

LSS Configuration Software - Configure IDs
Step 4/9
LSS-Config
Configuration Soft










Comments:Open the LSS Configuration Software. Software is available HERE

LSS Configuration Software - Configure IDs
Step 5/9
LSS-Config
Configuration Soft










Comments:Select your COM port and click Connect to initiate the communication

LSS Configuration Software - Configure IDs
Step 6/9
LSS-Config
Configuration Soft










Comments:Click SCAN and OK to scan for all servos

LSS Configuration Software - Configure IDs
Step 7/9
LSS-Config
Configuration Soft










Comments:Select the servo to be changed, if you had only one connected it will get selected by default.

LSS Configuration Software - Configure IDs
Step 8/9
LSS-Config
Configuration Soft










Comments:Set your ID in the field box and click Update. Your LSS will reboot now

LSS Configuration Software - Configure IDs
Step 9/9
LSS-Config
Configuration Soft
ID-Stickers
01 to 25








Comments:Apply a marker with the ID of your servo on the LSS

Tags:
Created by Eric Nantel on 2019/05/22 11:14
Copyright RobotShop 2018