LSS Config - Setting IDs

Version 7.1 by Eric Nantel on 2019/05/21 09:33

Material needed / suggested:

LSS Servo

LSS Adapter

LSS Power Supply

USB Cable

  1. Connect the Supply & USB to the Adapter
  2. Connect your LSS Servo to the Adapter
  3. Open the LSS Config
  4. Connect
  5. Set the servo ID & Update
  6. Apply a post-it
  7. Next servo / to Step 2

Tags:
Created by Eric Nantel on 2019/05/21 09:29
Copyright RobotShop 2018