LSS Configuration Software - Configure IDs

Version 92.1 by Eric Nantel on 2019/05/30 13:00

What's Needed

LSS Servo	Adapter Board	Wall Adapters	USB Cable

Step 1/7

1x LSS-ADA

LSS Adapter Board

Comments:Set the LSS Adapter Board to USB mode with the mode switch

LSS Configuration Software - Configure IDs

Step 2/7

1x USBC-02

USB to Mini B

1x 12V-XT60

12V w/ XT60

Comments:Connect both USB and power cables to the LSS Adapter

LSS Configuration Software - Configure IDs

Step 3/7

1x LSS-XXX

Any LSS Servo

1x LSS-C-XXX

LSS Cable

Comments:Connect the LSS cable between the LSS Adapter and the LSS

LSS Configuration Software - Configure IDs

Step 4/7

LSS-Config

Configuration Soft

Comments:Open the LSS Configuration Software. Software is available HERE

LSS Configuration Software - Configure IDs

Step 5/7

LSS-Config

Configuration Soft

Comments:Select your COM port and click Connect to initiate the communication

LSS Configuration Software - Configure IDs

Step 6/7

LSS-Config

Configuration Soft

Comments:Set your ID in the field box and click Update. Your LSS will reboot now

LSS Configuration Software - Configure IDs

Step 7/7

LSS-Config

Configuration Soft

Comments:Apply a marker with the ID of your servo on the LSS

Tags:

Created by Eric Nantel on 2019/05/22 11:14