LSS Firmware Update

Last modified by Eric Nantel on 2024/07/03 09:39

What's Needed

LSS - ServosModulesWiringWiringWall AdaptersLSS - Config
LSS-XXXLSS-ADALSS-C-XXXUSB-0212V-XT60Config Software
LSS-Servo.PNGLSS-ADA.pngLSS-C-100.pngUSB-Cable-A-Mini.PNGBX-12006000-XT60.PNGLynxmotion-Icon.png

LSS Configuration Software - Update Firmware
Step 1/7
1x LSS-ADA
LSS Adapter Board










Comments:Set the LSS Adapter Board to USB mode with the mode switch

LSS Configuration Software - Update Firmware
Step 2/7
1x USBC-02
USB to Mini B
1x 12V-XT60
12V w/ XT60








Comments:Connect both USB and power cables to the LSS Adapter

LSS Configuration Software - Update Firmware
Step 3/7
1x LSS-XXX
Any LSS Servo
1x LSS-C-XXX
LSS Cable








Comments:Connect the LSS cable between the LSS Adapter and the LSS. At that point you can flip the ON switch on your power supply.

LSS Configuration Software - Update Firmware
Step 4/7
LSS-Config
Configuration Soft










Comments:Open the LSS Configuration Software. Software is available HERE

LSS Configuration Software - Update Firmware
Step 5/7
LSS-Config
Configuration Soft










Comments:Select your COM port and click Connect to initiate the communication

LSS Configuration Software - Update Firmware
Step 6/7
LSS-Config
Configuration Soft










LSS Configuration Software - Update Firmware
Step 7/7
LSS-Config
Configuration Soft










Comments:The servo will now update. Wait until the process is finished in the LSS-Config.

Tags:
Created by Eric Nantel on 2024/07/03 09:39

Navigation

Copyright RobotShop 2018