Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -11,7 +11,7 @@
11	11
12	12	= LSS RC Mode =
13	13
14		-All three Lynxmotion Smart Servo motors can be used with normal hobby remote control (RC) electronics including handheld remote controls and RC servo controllers. Unlike normal RC servo motors however, the Lynxmotion servo's configurations can be changed via programming. There are two methods to change from serial to RC mode: via the [[LSS - Button Menu>>doc:Lynxmotion Smart Servo (LSS).LSS - Button Menu.WebHome||style="background-color: rgb(255, 255, 255);"]] or sending a CRC command (explained on the [[communication protocol>>doc:Lynxmotion Smart Servo (LSS).LSS - Communication Protocol.WebHome]] page). Note: Each mode can have the rotation reversed, but clockwise is standard (equivalent to CW1 or CW-1 commands).
	14	+All three Lynxmotion Smart Servo motors can be used with normal hobby remote control (RC) electronics including handheld remote controls and RC servo controllers. Unlike normal RC servo motors however, the Lynxmotion servo's configurations can be changed via programming. There are two methods to change from serial to RC mode: via the [[LSS - Button Menu>>doc:Lynxmotion Smart Servo (LSS).LSS - Button Menu.WebHome||style="background-color: rgb(255, 255, 255);"]] or sending a CRC command (explained on the [[communication protocol>>doc:Lynxmotion Smart Servo (LSS).LSS - Communication Protocol.WebHome]] page). Note: Each mode can have the rotation reversed, but clockwise is standard (equivalent to CW1 or CW-1 commands). The motion controller used in serial mode is not the same as the motion controller use in RC mode. RC mode is intended to add functionality to what would be considered "normal" RC behavior based on PWM input.
15	15
16	16	== RC 180° mode ==
17	17