3 DoF Arm Quickstart
Version 11.1 by Eric Nantel on 2020/02/18 10:37
LSS 3 DoF Robotic Arm KIT steps:
- 3dof-servo-setup
- 3dof-base
- 3dof-links-preparation
- 3dof-link-assembly
- 3dof-mini-gripper
- 3dof-final-assembly
- 07 - 3 DoF Wiring
Should you wish to go further with the arm, for example creating custom code (Arduino, Python etc.), or integrating the arm into a larger system or a mobile robot, we suggest you read through the LSS - Communication Protocol page. Should you wish to modify the hardware of the arm, it is important to understand the Lynxmotion Servo Erector Set (SES) v2 System.