Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -14,7 +14,6 @@
14	14	The idler horn sub-assembly consists of a custom spacer, a 3mm ID x 8mm OD flanged ball bearing (Lynxmotion standard) and the idler horn itself. The idler horn is held in place using an M3 x 10mm pan head machine screw. Documentation in this wiki referring to the "idler horn" normally refers to the idler horn assembly.
15	15	)))
16	16
17		-(% class="wikigeneratedid" %)
18	18	= Gearing =
19	19
20	20	The SES V2 system makes use of external gears in order to offset the axis of rotation and add additional support, as well as to increase the output torque. There are currently two sets of gears.
...	...	@@ -42,10 +42,11 @@
42	42	|Teeth|16|48|32|32
43	43	|Pitch|16|16|16|16
44	44	|Pressure Angle|20|20|20|20
45		-|Pitch Diameter| | |1"|1"
46		-|Outer Diameter| | |1.06"|1.06"
	44	+|Pitch Diameter|0.50"|1.50"|1"|1"
	45	+|Outer Diameter|0.56"|1.56"|1.0625"|1.0625"
47	47	|Material|Aluminum|Aluminum|Aluminum|Aluminum
48	48	|Spline|✓|✗|✓|✗
	48	+|Idler (bearing)|✗|✓|✗|✓
49	49
50	50	= LSS External Gear Mounting Options =
51	51