Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,6 +1,5 @@
1	1	= Gears =
2	2
3		-Edit
4	4	16T driven + 48T idler = 3:1 ratio
5	5
6	6	[[image:LSS-Gear-16T-Gearbox.png||width="300"]]
...	...	@@ -9,6 +9,7 @@
9	9
10	10	32T driven + 32T ideler = 1:1 ratio
11	11
	11	+[[image:LSS-Gear-32T-Gearbox.png||width="300"]]
12	12
13	13	This has no effect on gearing, rpm or overall angle. Having both gears on the LSS creates a second driven axis. A 1:1 configuration can be used with the gear bracket where high axial or radial loads exist. Center distance when using these two gears is 1.00 inches.
14	14
...	...	@@ -17,19 +17,19 @@
17	17	Edit
18	18	{Include image showing what each value represents - use Wikipedia or any other site "Spur gear nomenclature"}
19	19
20		- 16T Driven 48T Idler 32T Driven 32T Idler
21		- Teeth 16 48 32 32
22		- Pitch 16
23		- Pressure Angle 20 20 20 20
24		- Pitch Diameter 1" 1"
25		- Outer Diameter 1.06" 1.06"
26		- Material Aluminum Aluminum
27		- Spline
	20	+(% style="width:600px" %)
	21	+| |16T Driving|48T Idler|32T Driving|32T Idler
	22	+|Teeth|16|48|32|32
	23	+|Pitch|16| | |
	24	+|Pressure Angle|20|20|20|20
	25	+|Pitch Diameter| | |1"|1"
	26	+|Outer Diameter| | |1.06"|1.06"
	27	+|Material|Aluminum|Aluminum|Aluminum|Aluminum
	28	+|Spline|✓|✗|✓|✗
28	28
29	29	= Spline =
30	30
31		-Edit
32		-LSS Gear - 16T - Splines.png
	32	+[[image:LSS-Gear-16T-Splines.png||width="300"]]
33	33
34	34	The spline used on the LSS external gears is a 24 tooth version which is compatible with Hitec components.
35	35
...	...	@@ -39,5 +39,6 @@
39	39
40	40	= LSS External Gear Mounting Options =
41	41
42		-Edit
43	43	There are various ways to mount the gears to the servo without using the gear bracket. Below are just some examples showing gears mounted with and without the gearbox bracket. Note that the gearbox bracket can be mounted on multiple sides of the servo. The gearbox bracket is used largely for applications with higher forces (axially and radially) and higher torque.
	43	+
	44	+[[image:LSS-Gear-All-Ratios.png||height="211" width="600"]]