Modular Tracks System (MTS)

Last modified by Eric Nantel on 2023/01/31 08:52

Table of Contents

Description
User Guide

Description

Introducing the Lynxmotion Modular Track System (MTS)
After spending months searching for a decent track system, we gave up and decided to make our own. These polypropylene / rubber tracks are perfect for your small robot project. They are rugged, lightweight, reliable. These tracks will not slip from the sprockets. They are extremely smooth and quiet and have very little friction. There are a variety of sprockets available, with a selection of different hubs.

	MTS Tooth Rugged Polycarbonate tooth Compatible with Lynxmotion 2" and 3" tracks Sold separately as replacement teeth
	MTS Track - 2" Wide Rugged polypropylene links. Rubber has a Shore A hardness of 45. Pitch is 1.07", and width is 2". Very easy to interconnect to make custom lengths
	MTS Track - 3" Wide Rugged polypropylene links. Rubber has a Shore A hardness of 45. Pitch is 1.07", and width is 3". Very easy to interconnect to make custom lengths
	MTS 12T Sprocket (6mm Hub) 12 Tooth single row MTS Sprocket Includes our Universal 6mm Hub (HUB-02). Sprocket diameter with tracks is ~4.5" Pitch diameter (calculated, not measured) 2.14" Designed to be used with 2" and 3" wide tracks
	MTS 15T Sprocket - Large (No Hub) 15 Tooth single row MTS Sprocket Large Hub sold separately - several options. Sprocket diameter with tracks is ~5.75" Designed to be used with 2" and 3" wide tracks
	MTS 15T Sprocket (6mm Hub) 15 Tooth single row MTS Sprocket Includes our Universal 6mm Hub (HUB-02). Sprocket diameter with tracks is ~5.75" Designed to be used with 2" and 3" wide tracks
	MTS 18T Sprocket (6mm Hub) 18 Tooth single row MTS Sprocket Includes our Universal 6mm Hub (HUB-02). Sprocket diameter with tracks is 7" Designed to be used with 2" and 3" wide tracks

User Guide

Tags:

Created by Eric Nantel on 2023/01/13 12:31

Modular Tracks System (MTS)

Description

User Guide

Navigation