06 - Setup
Version 43.1 by Eric Nantel on 2021/11/08 14:38
Radio Control (RC) Mode
| 1. Set the Sabertooth DIP Switches for your needs | |||
| Sabertooth 2 x 12A Standard | Typical Setup | ||
 | 1 | OFF (Enable RC Mode) | |
| 2 | ON (Enable RC Mode) | ||
| 3 | OFF (Lithium Battery Mode) | ||
| 4 | ON (Enable Mixing Mode) | ||
| 5 | ON (Disable Exponential) | ||
| 6 | OFF (Disable Timeout) | ||
| Sabertooth 2x12 - Dip Switch Wizard | |||
| Sabertooth 2x12 - User Guide | |||
| 2. Connect the battery | |||
| 3. Enjoy | |||
Microcontroller / Autonomuous
| 1. Set the Sabertooth DIP Switches for your needs | |||
| Sabertooth 2 x 12A Standard | Typical Setup | ||
| 1 | OFF / Enable RC Mode | |
| 2 | ON / Enable RC Mode | ||
| 3 | OFF / Lithium Battery Mode | ||
| 4 | ON / Enable Mixing Mode | ||
| 5 | ON / Disable Exponential | ||
| 6 | OFF / Disable Timeout | ||
| Sabertooth 2x12 - Dip Switch Wizard | |||
| Sabertooth 2x12 - User Guide | |||
| 2. Connect the Sabertooth to your Microcontroller | |||
| Sabertooth to BotBoarduino | |||
| 3. Load the microcontroller with Code | |||
| Lynxmotion GitHub - A4WD3 - WASD Keyboard Example | |||
| Lynxmotion GitHub - A4WD3 - PPM RC Example | |||
| 4. Connect the battery | |||
| 5. Enjoy | |||