SES - Mounting Pattern
Version 1.1 by Eric Nantel on 2021/08/06 13:23
SES V2 Pattern
Newer brackets and parts have four additional holes (for a total of eight holes) spaced at 45 degrees to allow for easy mounting.
- 8mm diameter center hole
- Eight equally spaced holes located on a 0.656” diameter circle. Holes are threaded 2-56 (imperial).
- Outer diameter is 1” (2.54cm)
)))
 | SES V2b Pattern Several of the brackets have an opening which allows the SES V2 cable(s) to pass through. The aluminum clamping hub also has this opening, so when used with carbon fiber tubing, the wires can be passed within the structure.
|