HQuad500 Quadcopter

Last modified by Eric Nantel on 2023/02/07 14:05

HQ5A1-KT - 02.jpg


Table of Contents


HQuad500 Kits
The HQuad500 is a 500mm quadcopter built using the new Lynxmotion M.E.S. (MultiRotor Erector Set) system. The design uses our new aluminum clamps along with 16mm carbon fiber tubes. This combination of parts allows the frame to be:

  • Incredibly rigid (minimal flexing)
  • Versatile (Integrated mounting for upgrades)
  • Lightweight (use of composites and Aluminum)
  • Modular (change the frame / use different length tubes)

We equipped the HQuad500 with a camera plate up front which is removable. Different plates will be available as well as a stabilized gimbal system. The flight controller mounting is located at the "dead center" of the frame with slots accommodating 30.5mm to 45mm mounting. The frame is compatible with the Lynxmotion Quadrino Nano Flight Controller with a section designed for the GPS antenna and access to the underside ports. There are integrated mounting plates for the ESCs which allow for easy access.


  • G10 plates / panels
  • Carbon fiber tubes
  • Aluminum brackets and standoffs
  • Motor to Motor: 500mm (492.29mm)
  • Propellers: 8" to 10"
  • Front Arm Angle: 150° (149.05°)
  • Assembled Weight: 383g (frame only)
  • Flight Controller Mount: Flat surface as well as 30.5mm to 45mm slots (direct compatible with the Quadrino Nano)
  • Mounting holes on the lower frame for use with a Lynxmotion pan/tilt and/or gripper

To keep costs down and ensure you have the most recent version, we are not providing printed assembly guides. They are provided online, so you will need to print them when you order the kits. By providing the assembly guides online we can provide more detailed and up to date information than the old hardcopy method allowed.

User Guide

Created by Eric Nantel on 2023/02/07 12:58
Copyright RobotShop 2018