06 - Setup
Version 27.1 by Eric Nantel on 2021/11/04 08:38
Radio Controlled (RC)
| Sabertooth 2 x 12A Radio Control (RC) | ||
| DIP Switches Information | ||
| OFF | # | ON |
| Independant Control | 1 | Mixed Mode (tank) |
| Disable Exponential | 2 | Enable Exponential |
| Lithium Mode | 3 | Non-Lithium Mode |
| Enable Ramping | 4 | Disable Ramping |
| Disable Autocalibrate | 5 | Enable Autocalibrate |
| Disable Signal Timeout | 6 | Enable Signal Timeout |
| Typical Setup | ||
 | 1 | ON / Enable Mixing Mode |
| 2 | OFF / Disable Exponential | |
| 3 | OFF / Lithium Battery Mode | |
| 4 | OFF / Disable Ramping | |
| 5 | OFF / Disable Auto-Calibration | |
| 6 | ON / Enable Timeout | |
| Sabertooth 2x12 RC - Dip Switch Tour | ||
| Sabertooth 2x12 RC - User Guide | ||
Microcontroller / Autonomuous
| Sabertooth 2 x 12A Standard (with heat sink) | ||
| Typical Setup | ||
 | 1 | OFF / Enable RC Mode |
| 2 | ON / Enable RC Mode | |
| 3 | OFF / Lithium Battery Mode | |
| 4 | ON / Enable Mixing Mode | |
| 5 | ON / Disable Exponential | |
| 6 | OFF / Disable Timeout | |
| Sabertooth 2x12 - Dip Switch Wizard | ||
| Sabertooth 2x12 - User Guide | ||