Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -84,7 +84,11 @@
84	84	|(% style="width:300px" %)[[image:LSS Adapter - XBee Standard.png||alt="LSS Adapter - XBee Standard.jpg" width="350"]]|(((
85	85	== ==
86	86
87		-To use the LSS Adapter Board with an XBee Module, the switch should be on **position 2**. This configuration allows controlling LSS Servos wirelessly with an XBee/Bluetooth Bee/Wifi Bee module. When XBee (position 2) is selected on the communication switch, the XBee Rx serial pin is connected to the LSS Servo's Tx pin and the XBee Tx serial pin is connected to the LSS Servo Rx pin. This way, the Bee module communicates directly with the LSS Servos through the adapter.
	87	+To use the LSS Adapter Board with an XBee Module, the switch should be on **position 2**.
	88	+
	89	+This configuration allows controlling LSS Servos wirelessly with an XBee/Bluetooth Bee/Wifi Bee module.
	90	+
	91	+When XBee (position 2) is selected on the communication switch, the XBee Rx serial pin is connected to the LSS Servo's Tx pin and the XBee Tx serial pin is connected to the LSS Servo Rx pin. This way, the Bee module communicates directly with the LSS Servos through the adapter.
88	88	)))
89	89	|(% style="width:300px" %)[[image:LSS Adapter - XBee Explorer.png||alt="LSS Adapter - XBee Explorer.jpg" width="350"]]|(((
90	90	The XBee Rx pin and Tx pins are connected to the Arduino's pin 8 and 9 respectively. Therefore, the LSS Adapter Board can be also used as a USB XBee explorer to configure the XBee module through USB. To use the LSS Adapter Board as a USB XBee explorer :