Description

LSS Power Hub provides a simple and quick solution to supply power and operate the LSS. It is required to split the LSS bus from the LSS Adapter/LSS to 3 LSS ports. It also allows powering 3 LSS on-board ports with a separate power supply by removing a jumper.

Features

• 4 x LSS connectors
• Onboard 2.1mm x 5.5mm female barrel jack
• Tx and Rx pins broken out to provide control of the LSS servos using an external UART serial device
• Jumper to power 3x LSS channels through the main power supply or from a separate one (allows additional power to be input where many servos are daisy chained)

• LSS servo mountable
• Maximum current of 3A from the main supply
• Dimensions : 1" x 1.25" (with mounting tabs), 1" x 1" (without mounting tabs)