Wiring
PICTURE | NAME / DESCRIPTION | SES V1 | SES V2 | Lynxmotion SKU | RobotShop SKU | CAD |
|---|---|---|---|---|---|---|
| Lynxmotion Smart Servo (LSS) - Serial Cables Lynxmotion SKU: 100mm / 150mm / 200mm 300mm | X | ✓ | LSS-C-100-S LSS-C-150-S LSS-C-200-S LSS-C-300-S | ||
| Lynxmotion Smart Servo (LSS) - 300mm RC Cable This cable allows the LSS servos to be easily connected to a standard 3-pin RC source. The fourth connector (from the servo's Tx pin) is separate. Should additional length be needed, a standard 3-pin servo extension (male to female) cable can be used. | X | ✓ | LSS-C-300-RC | RB-Lyn-993 | |
| Lynxmotion Smart Servo (LSS) - Serial Y Cables Lynxmotion SKU: 100mm / 150mm / 200mm / 300mm | X | ✓ | LSS-C-100-Y LSS-C-150-Y LSS-C-200-Y LSS-C-300-Y | ||
| Plastic Cable Clip Clip intended to be mounted to SES V2 brackets to help with wire routing. Magnets are meant to attach external shells. | X | ✓ | CC-01 |
| |
| Magnets for the Cable Clip | CC-MAG | ||||
| Extra Long Stacking Headers These extra long stacking headers are intended to be use with the LSS Adapter and fit through the board. They are used to stack a shield above the LSS adapter and onto a shield compatible microcontroller. | X | ✓ | LSS-ADA-HK | RB-Lyn-1025 |
|
| Lynxmotion USB to Mini B Cable 3' | USBC-02 | RB-Cab-02 | |||
| Servo Extender Cable 6" | SEA-01 | RB-Onl-02 | |||
| Servo Extender Cable 12" | SEA-02 | RB-Onl-03 | |||
| Pin Jumper (2.54mm) | JUMPER-2.54mm | ||||
| Nylon Zip Tie 7" | ZT-07in |
