Wiring
| PICTURE | NAME / DESCRIPTION | Lynxmotion SKU | RobotShop SKU | CAD |
|---|---|---|---|---|
| Lynxmotion PRO CAN / Ethernet Cable | LSS-P-ETH-500 LSS-P-ETH-650 LSS-P-ETH-900 | ||
| Lynxmotion PRO Power XT60 Extension Cable | LSS-P-XT60-500 LSS-P-XT60-650 LSS-P-XT60-900 | ||
| Lynxmotion Smart Servo (LSS) - Serial Cables Lynxmotion SKU: 100mm / 150mm / 200mm 300mm | LSS-C-100-S | ||
| Lynxmotion Smart Servo (LSS) - 300mm RC Cable This cable allows the LSS servos to be easily connected to a standard 3-pin RC source. The fourth connector (from the servo's Tx pin) is separate. Should additional length be needed, a standard 3-pin servo extension (male to female) cable can be used. | LSS-C-300-RC | RB-Lyn-993 | |
| Lynxmotion Smart Servo (LSS) - Serial Y Cables Lynxmotion SKU: 100mm / 150mm / 200mm / 300mm | LSS-C-100-Y | ||
| Plastic Cable Clip Clip intended to be mounted to SES V2 brackets to help with wire routing. Magnets are meant to attach external shells. | CC-01 |
| |
| Magnets for the Cable Clip | CC-MAG | ||
| Extra Long Stacking Headers These extra long stacking headers are intended to be use with the LSS Adapter and fit through the board. They are used to stack a shield above the LSS adapter and onto a shield compatible microcontroller. | LSS-ADA-HK | RB-Lyn-1025 |
|
| Lynxmotion USB A to Mini B
| USBC-02 | RB-Dfr-380 | |
| Lynxmotion USB A to Type C
| USBC-03 | RB-Cyt-293 | |
| Servo Extender Cable 6" | SEA-01 | RB-Onl-02 | |
| Servo Extender Cable 12" | SEA-02 | RB-Onl-03 | |
| Servo Extension with Bare Wires 12" | SC-01 | RB-Onl-05 | |
| Pin Jumper (2.54mm) | JUMPER-2.54mm | ||
| Nylon Zip Tie 7" | ZT-07in | ||
| Power Harness XT60 to XT30
| WH-XT60-XT30-KT | RB-Lyn-1143 |
