Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,0 +1,35 @@
	1	+= Step 1 - Connections =
	2	+
	3	+__Warning: Make sure your power supply is OFF and wait at least 10s before connecting to the LSS-P actuator.__
	4	+
	5	+* (((
	6	+Connect the XT60 from your power supply
	7	+)))
	8	+* Connect the USB Type-C cable
	9	+
	10	+= Step 2 - Power-Up =
	11	+
	12	+* Proceed with powering the actuator
	13	+
	14	+= Step 3 - Software =
	15	+
	16	+* Install the LSS PRO Configuration software (HERE)
	17	+* Open the LSS PRO Configuration software
	18	+
	19	+= Step 4 - Connection =
	20	+
	21	+* Select the COM port associated with your actuator
	22	+* Click Connect
	23	+
	24	+= Step 5 - Selection =
	25	+
	26	+* In the drop-down menu, select your actuator
	27	+
	28	+= Step 6 - Set the ID =
	29	+
	30	+* In the "Configuration" drop-down menu, select "CID / ID Number"
	31	+* In the text entry box, set the desired ID number
	32	+* Click on the "Send" button
	33	+* Click on the "Reset button
	34	+
	35	+At that point your Actuator should have the new ID configured.