Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,35 +1,0 @@
1		-= Step 1 - Connections =
2		-
3		-__Warning: Make sure your power supply is OFF and wait at least 10s before connecting to the LSS-P actuator.__
4		-
5		-* (((
6		-Connect the XT60 from your power supply
7		-)))
8		-* Connect the USB Type-C cable
9		-
10		-= Step 2 - Power-Up =
11		-
12		-* Proceed with powering the actuator
13		-
14		-= Step 3 - Software =
15		-
16		-* Install the LSS PRO Configuration software (HERE)
17		-* Open the LSS PRO Configuration software
18		-
19		-= Step 4 - Connection =
20		-
21		-* Select the COM port associated with your actuator
22		-* Click Connect
23		-
24		-= Step 5 - Selection =
25		-
26		-* In the drop-down menu, select your actuator
27		-
28		-= Step 6 - Set the ID =
29		-
30		-* In the "Configuration" drop-down menu, select "CID / ID Number"
31		-* In the text entry box, set the desired ID number
32		-* Click on the "Send" button
33		-* Click on the "Reset button
34		-
35		-At that point your Actuator should have the new ID configured.