Lynxmotion Smart Servo (LSS)
Table of contents
Description
The Lynxmotion Smart Servo (LSS) are intended to be an evolution of the standard RC servo for use in custom RC projects, animatronics, robotics and more. The servos are core modules of the Lynxmotion Servo Erector Set (2nd generation) and a wide variety of modular brackets, mechanics, electronics have been designed around them. The lineup currently includes three “smart servos” which differ in maximum torque and speed. The easiest way to differentiate between the three models is based on the sticker, located at the rear of the servo. Lynxmotion software automatically determines which model is connected.
Features
- Serial, RC PWM and continuous rotation modes
- Simplified LSS Communication Protocol
- Button Menu, RGB LED
- Sensor feedback: Voltage, current, position, temperature, status and more.
- Fully configurable: center position, angular range, speed and much more.
- Libraries: Arduino, Python, ROS
- 6-12V operation (3S LiPo nominal)
- Standard 24T output spline (compatible with accessories made for Hitec 422, 645MG servos)
- Many Mounting points, brackets, accessories
Specifications
Pinout
Wiring
Power
Configurations
Dimensions
NOTE: The Lynxmotion Smart Servo motors, as well as the SES modular construction system is NOT open source. As such, RobotShop cannot provide the schematics for the electronics, nor any details relating to the components used internally. Opening the servos without the express permission from RobotShop will void the warranty.