Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-xwiki:XWiki.CBenson
	1	+xwiki:XWiki.ENantel

Content

...	...	@@ -313,9 +313,9 @@
313	313
314	314	====== __Baud Rate__ ======
315	315
316		-{{html wiki="true" clean="false"}}
	316	+{{html clean="false" wiki="true"}}
317	317	<div class="cmdcnt"><div class="cmdpad"></div><div class="cmdtxt">
318		-A servo's baud rate cannot be set "on the fly" and must be configured via the CB command described below. The factory default baud rate for all servos is 115200. Since smart servos are intended to be daisy chained, in order to respond to the same serial command, all servos in a project should be set to the same baud rate. Setting different baud rates will have the servos respond differently and may create issues. Available baud rates are: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115.2 kbps, 230.4 kbps, 250.0 kbps, 460.8 kbps, 500.0 kbps. Servos are shipped with a baud rate set to 115200.<div class="wikimodel-emptyline"></div>
	318	+A servo's baud rate cannot be set "on the fly" and must be configured via the CB command described below. The factory default baud rate for all servos is 115200. Since smart servos are intended to be daisy chained, in order to respond to the same serial command, all servos in a project should be set to the same baud rate. Setting different baud rates will have the servos respond differently and may create issues. Available baud rates are: 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115.2 kbps, 230.4 kbps, 250.0 kbps, 460.8 kbps, 500.0 kbps, 750.0 kbps, 921.6 kbps. Servos are shipped with a baud rate set to 115200.<div class="wikimodel-emptyline"></div>
319	319
320	320	Query Baud Rate (**QB**)<div class="wikimodel-emptyline"></div>
321	321
...	...	@@ -464,7 +464,7 @@
464	464	| |ex: *5Q3<cr>|3: Accelerating|Increasing speed from rest (or previous speed) towards travel speed
465	465	| |ex: *5Q4<cr>|4: Traveling|Moving at a stable speed
466	466	| |ex: *5Q5<cr>|5: Decelerating|Decreasing from travel speed towards final position.
467		-| |ex: *5Q6<cr>|6: Holding|Keeping current position
	467	+| |ex: *5Q6<cr>|6: Holding|Keeping current position (in EM0 mode, return will nornally be holding)
468	468	| |ex: *5Q7<cr>|7: Outside limits|{More details coming soon}
469	469	| |ex: *5Q8<cr>|8: Stuck|Motor cannot perform request movement at current speed setting
470	470	| |ex: *5Q9<cr>|9: Blocked|Similar to stuck, but the motor is at maximum duty and still cannot move (i.e.: stalled)