Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -48,7 +48,7 @@
48	48
49	49	== Configuration Commands ==
50	50
51		-Configuration commands affect the servo's current session* but unlike action commands, configuration commands are written to EEPROM and are retained even if the servo loses power (therefore NOT session specific). Not all action commands have a corresponding configuration and vice versa. Certain configurations are retained for when the servo is used in RC model. More information can be found on the [[LSS - RC PWM page>>doc:LSS - RC PWM.WebHome]].
	51	+Configuration commands affect the servo's current session* but unlike action commands, configuration commands are written to EEPROM and are retained even if the servo loses power (therefore NOT session specific). Not all action commands have a corresponding configuration and vice versa. Certain configurations are retained for when the servo is used in RC model. More information can be found on the [[LSS - RC PWM page>>doc:Lynxmotion Smart Servos (LSS).LSS - RC PWM.WebHome]].
52	52
53	53	1. Start with a number sign # (U+0023)
54	54	1. Servo ID number as an integer
...	...	@@ -125,7 +125,7 @@
125	125	| 11|**W**heel mode in **R**PM| WR| QWR| | | ✓| rpm|
126	126	| 12|Max **S**peed in **D**egrees| SD| QSD| CSD| ✓| ✓| tenths of degrees per second (ex 248 = 24.8 degrees per second)|Add modifier "2" for instantaneous speed
127	127	| 13|Max **S**peed in **R**PM| SR| QSR| CSR| ✓| ✓| rpm|Add modifier "2" for instantaneous speed
128		-| 14|**A**ngular **S**tiffness| AS| QAS| CAS| ✓| ✓|none|
	128	+| 14|**R**igidity| R| QR| CR| ✓| ✓|none|
129	129	| 15|//N/A (removed)//| | | | | | |
130	130	| 16|**LED** Color| LED| QLED| CLED| ✓| ✓| none (integer from 1 to 8)|0=OFF 1=RED 2=GREEN 3= BLUE 4=YELLOW 5=CYAN 6= 7=MAGENTA, 8=WHITE
131	131	| 17|**ID** #| ID| QID| CID| | ✓| none (integer from 0 to 250)|Note: ID 254 is a "broadcast" which all servos respond to